Add site to bookmarks

• Species
• Choice
• Installation
• Finishing
• Repair
• Installation
• Device
• Cleaning

How to install a shower tray?

• Types of pallets: nuances of operation
• How to install a shower tray: installation and its features
• DIY shower tray for a bathroom made of brick and concrete

High-quality installation of a shower stall requires strict adherence to all manufacturer’s recommendations and the implementation of measures to protect the room from possible leaks. The issue becomes especially serious if you install a shower tray yourself in a multi-storey building, because the wrong installation will lead to damage to the repairs of the neighbors below.

Installation shower tray must be carried out carefully and in accordance with all necessary requirements, otherwise the neighbors may be flooded.

Types of pallets: nuances of operation

Shower stalls and corners have recently become very popular, as not only the already small space of the bathroom is saved, but also a wide range of functions becomes possible, for example, hydromassage treatments, aromatherapy, steam generation, musical accompaniment and much more.

In addition, many samples sold on construction markets allow the buyer to choose exactly the option that will ideally suit the bathroom interior and meet their financial capabilities.

A wide variety of shower trays in shape allows you to choose exactly the option that suits the specific interior of the bathroom.

Installation can be carried out either by invited craftsmen who know everything about the correct installation of shower trays and other elements of equipment, or by yourself. However, you should first familiarize yourself with all the nuances of performing the work.

Pallets vary in design. The most expensive and durable besides marble pallets is a cast iron pallet, and only after that come all the others. In reality, all pallets have relatively long term service and high strength characteristics. A ceramic tray will be particularly beautiful and unique, but such trays are expensive and unstable to mechanical damage.

Today, the most affordable and popular are acrylic shower trays. But under load they bend, as a result of which installation must be carried out using special frame brackets for fastening, adjustable legs and other elements that ensure correct installation shower trays.

Cheap shower trays made of acrylic without support for the base and central part, reinforced only around the perimeter, may not cope with the load and burst.

Therefore, in order to install a shower tray correctly - and this does not depend on who performs the work, be it a team of craftsmen or self-installation shower stall - you need to pay special attention to strengthening the bottom of the tray.

If the set frame base includes only the outer legs, the tray in the bathroom will require the manufacture of additional supports. You can do this work yourself; the design is simple. For this you will need a piece metal pipe, a box tube of the required length and a rubber gasket.

Return to contents

How to install a shower tray: installation and its features

Diagram is an example of dimensions for installing a shower tray.

If you install the pallet yourself, you must be especially careful to align and adjust its legs. They should be adjusted according to the unevenness of the floor. The assembly procedure is usually described in detail in the attached instructions and includes installation of a pallet (plastic or metal trough), connection of the drain mechanism and removal of sewage.

Installation of cubicle doors and walls (if any) depends on the type of structure and may include installation of electrical or water connection. Upon completion of work, control tests must be carried out (especially for multifunctional units).

Quality control (whether the shower tray was installed correctly) can be done as follows: you need to stand on the tray, and if it cracks and bends, modification is necessary.

It is very easy to secure the tray in the bathroom by installing support bricks under its base.

Having previously placed the pallet in a horizontal position using a level, the bricks can even be placed on mortar for additional strength.

Failure to comply with the above rules may result in damage to the acrylic shower tray. Although acrylic pallets can be repaired, no one wants to incur additional expenses.

If necessary, after preliminary leveling, you can use bath enamels, fiberglass and epoxy putties or mastic. Of course, this will make the appearance lose its attractiveness.

Installation of shower trays made of marble, ceramics and cast iron is not so common. However, steel pallets are quite popular. Often the installation is carried out without any walls or doors, only a protective curtain is installed. Although it's quite economical option, but it requires cladding of the wall sides, additional sealing and waterproofing.

Steel pallets, like acrylic ones, must be placed on a metal frame (the bottom of the trough must be thoroughly secured), plastic support elements or ordinary bricks.

To further insulate and compact the base, the space between the trough and the floor can be filled polyurethane foam. But it should be understood that this will create certain difficulties during repair or dismantling.

Installation shower corner with a pallet with your own hands is possible if everything is done according to the instructions for the device. Even without much experience working with plumbing equipment, you can install a shower stall in your bathroom yourself.

Required materials and tools

In order to start installing the shower enclosure, you need to collect everything necessary tools and materials:

• Pipes for connecting the structure to the sewer and water supply systems.
• Ready pallet. Usually it comes included. It comes with all the necessary elements for installation. These are fixing legs and fastenings.
• Corner walls of the shower stall.
• Beams for glass cabin doors.
• Elements for securing the components of the shower cabin.
• Hermetic material. For example, it could be silicone mass.

Features of installing a shower corner

Stages of work on installing a shower enclosure:

1. Because When installing a shower enclosure, this device does not have rear walls or a roof. The tray and doors are installed. The first step is to make all the necessary markings in the bathroom. The installation of the structure will be carried out based on them.
2. Because the liquid will constantly get on the walls and possibly on the ceiling, they will need to be treated with a water-repellent compound.
3. Installation of the pallet on the floor begins with its assembly. The set should include legs for the device. They should be firmly secured to the bottom of the pallet. To prevent them from squeaking, it is better to use a rubber seal.
4. The pallet should fit snugly against the wall. A quality product has an angle of exactly 90 degrees. The same angle should be at the wall. This needs to be checked in advance. If there are deviations, it is recommended to eliminate them.
5. A siphon must be connected to the pan. It should fit snugly into the drain hole. Additionally, it is better to cover the joint with sealants.
6. The pallet is turned over and placed on the floor. At this stage, it is checked whether the product wobbles or creaks under the weight of an adult man.
7. Connecting the pan to the sewer system. To do this, the drain pipe connected to the pan is led into the sewer manhole. The place where the sewerage components combine must also be treated with sealed silicone.
8. Once the pan is connected to the sewer, it will be possible to finally fix its side walls.
9. It is easier to install the beams on which the curtains will be hung on your own. Glass doors can be installed. But this process requires professional knowledge and training.

Instructions for installing a shower enclosure:

Additional information:

• Among the wide variety of plumbing equipment, it is difficult to choose something for yourself right away. You need to know the rules of how to choose a shower stall for…
• The shower cabin connection diagram is represented by the following sequence of actions: Installation of the tray. The features of this stage of work directly depend on the selected device. They differ...
• Installing a shower cabin with your own hands is necessary if you are equipping a small bathroom. There is absolutely no place to put a Jacuzzi in it. A…

The use of shower stalls or shower enclosures allows you to significantly reduce the area used for this without losing much functionality. The latter types of structures are somewhat simpler, which has led to their wide distribution.

There are several types of shower enclosures, which often differ in the size of the tray and enclosure systems. More information about products such as Sturm shower enclosures can be found on the website sanok.ru/wgoods_80_f209.html.

Preparatory work

The process of installing a shower enclosure often involves performing some preliminary work:

• First, the wiring and laying of all water supply systems to the installation site is carried out. You should also take care of laying a sewer system in which the waste solution will be collected.
• After this, the walls are leveled. This is often done using special cement mortars. After they harden, they are covered ceramic tiles. It is especially important to create a flat surface where the walls will be located at an angle of 90 degrees relative to each other.

Installation algorithm

The process of installing a shower enclosure can be divided into several sequential steps:

1. First of all, the foundation is laid out. Very often, brickwork is used for this. Please note that many types of pallets are equipped with special metal frames that prevent such operations.
2. At this stage, the drain connection is made. This is quite simple to do, but it is advisable to use high-quality seals. After this process, you should definitely check the system for leaks.
3. Fixing the pallet. This process can be performed in several ways. If used as a frame brickwork, then the pallet is attached to a special solution, tightly adjacent to the walls. Models with metal frames are attached to the floor using dowels and screws. For this purpose, there are special holes in the legs, into which they help to perform fixation. It should be understood that the pallet must be positioned evenly and tightly to the wall.
4. At this stage, the installation of curtains or panels is carried out. The first structures are often attached to the wall at a certain height. You can make them yourself or purchase them in a store.

As for the panels, they are fixed to the pallet using a special glue. They are also attached to the wall using special profiles and dowels. The difficulty of installing them is only in correct alignment relative to the axes.

Installing a shower enclosure is a very simple operation that can be done by almost anyone, as this video clearly shows:

Unfortunately, not everyone can boast of a large, spacious bathroom; for some, this is a problem, while for others, this option is their favorite. In any case, a shower corner is an ideal option for arranging a bathroom. Even if you have a large bathroom, a shower corner will not spoil the room in any way, but, on the contrary, will decorate it. However, this is a matter of tastes and principles, because some people find it more convenient to take a bath, while others prefer to wash in the shower. Do not confuse a shower stall with a shower corner, because these are slightly different things. The shower stall differs from the corner in the absence of ceiling panels and rear walls. In this article we will talk about the shower corner.

If you are determined to install a shower enclosure in your bathroom, but do not know how to do this work correctly, then be attentive to the tips that will be in this article, and then you can easily install the shower on your own. You will also learn how to choose a shower enclosure and what you need to pay attention to when purchasing.

Benefits of a shower enclosure

Such a device as a shower corner has the following advantages:

Choosing a shower enclosure with a tray

Shower enclosures differ in shape, size and material from which it is made. Also decide in which corner of the bathroom it will be installed. It is not necessary to buy a cabin and a pallet as a set; as a rule, construction stores should have a large selection of both pallets and cabins that can be easily combined. It is worth considering the fact that when buying two parts from different manufacturers, certain difficulties may arise due to the difference in size. Therefore, we select only those parts that fit each other perfectly.

Advice! Buy the corner and tray from the same store, this will make it easier for you to select and combine the two parts together.

Manufacturers produce the following types of pallets:

The latter version of pallets is very popular, and all because it has many advantages, such as: average weight, durability and relatively low price. Such a platform can be rectangular, round or square. Special attention you need to pay attention to the doors, because if they come into contact with the wall when opening, they may be damaged or even break. Therefore, take accurate measurements before purchasing. By appearance glass doors also have slight differences, since they can be not only frosted or transparent, but also with quite different and at the same time attractive texture and coloring. Even the handles on shower enclosure doors can be very different from each other.

Materials and equipment

In order to install the corner with your own hands, you will need the following components:

Installation of a shower enclosure with a tray

The first step is to install the pan, but since most pans don't come with mounting hardware, you'll have to make your own. To assemble such a frame, iron corners and a pipe with a diameter of 30-40 mm are most often used. You will have to cut and weld these parts together. There is another option for mounting the pallet - this is installation on bricks and cement-sand mortar. The installed pallet should not wobble on its base; it should fit snugly to the base.

Let's start installing the drainage system. The process of installing the siphon to the base occurs even before the control installation of the pallet to the frame. You should think in advance about how the siphon will be repaired in the future, because sooner or later it may become clogged. Install a small ventilation window so you can make repairs later. After installing the siphon, check whether it is leaking water. To do this, you need to fill the pan with several liters of water and inspect the drainage system. Also pay attention to ensuring that there is good contact between the tiles and the pallet, and that all cracks are sealed with sealant.

Now you can begin installing the panels. First of all, you need to assemble the iron frame of the cabin. Next, you need to secure the bottom guide; this can be done using sealant. How to install vertical posts? To do this, you need to use a plumb line and a level, so you can make an accurate angle of inclination. At the fastening points, use a marker to draw the points where you will drill the hole for the dowels. Using a drill and a special tile bit, make holes in the wall.

Advice! When drilling tiles with a drill or hammer drill, do not use the hammer, otherwise the tile will burst and fly off the wall.

Before you attach the studs to the surface of the walls, lubricate the inside of them well with sealant, thanks to this you will achieve better adhesion. Next, using self-tapping screws, secure the vertical guide post. After all the above operations, you can safely begin installing the glass. However, when doing this work, be extremely careful, as you can easily injure yourself or damage the glass. The glass must get into all the mechanisms manufactured by the factory, only after that it can function normally. However, in order for the doors to close normally without coming into contact with other elements of the shower enclosure, they must be adjusted. This procedure is carried out according to the instructions supplied with the corner.

The last step in assembling the corner is attaching the door fittings and sealing. It is necessary to ensure that all cracks are properly sealed both outside and inside. The sealant is applied only after the surface has been cleaned and degreased. Sealing is carried out both near the tile and on the pallet. We can say that sealing the gaps between the tray and the tiles is one of the most important jobs in installing a shower enclosure.

You can learn more about how to install a shower enclosure by watching this video:

Bottom line

Thanks to the information in this article, you may have learned that installing a shower tray is not a difficult job at all. We wish that installing a shower enclosure in your home would be just as easy.