Many people face difficulties during operation. And in the detailed instructions it is quite difficult to find the necessary information. Next, we will consider an abbreviated version of the operating instructions for the Bosch maxx 5 washing machine, which will contain only basic information.
Correct installation of the machine
Bosch Maxx 5 washing appliances should be installed on a reinforced surface. It should be noted that during the washing process the machine may move due to strong vibration. That is why it should be installed level. It’s even better to fix the body by additionally securing the legs.
It is important to note that this washing equipment is heavy. Therefore, you need to be very careful when moving it from one place to another.
After unpacking the machine, you need to check the condition of the case. If damage is found, the equipment must be returned to the store. You don't even need to connect it to the mains.
If the body of the machine has no defects, then you can. However, it is necessary to first prepare the place where the washing equipment will be located.
To do this you need to do the following:
- Strengthen the floor.It is not at all necessary to make the floor perfectly level, because at the base of the washing machine there are twist-out legs with which you can adjust its position.
- Organize sewerage and water pipe. You also need to install a moisture-resistant outlet for the washing machine.
- Check the space in which it will be placed washing machine. The gap between objects located nearby should be at least 1 centimeter.
The fifth Bosch Maxx model contains special ones on the back wall. They secure the drum during transportation. Before using the machine, they should be unscrewed. These bolts should be collected, but not thrown away. They may be needed in the future.
Then you need to plug the holes for the bolts. It is also necessary to remove the drain and fill hoses from the fixing fasteners. But this is done after moving the washing machine to the installation site.
Then you need to place a building level on the lid of the washer, and then unscrew its legs one by one until the machine is level. The deviation should not exceed 2 degrees. Next you need. It needs to be bent in such a way that water remains in the knee. Then no foreign odors from the sewer pipe will enter the machine. The best connection height is 60 centimeters.
Next, you need to connect the inlet hose to the water pipe. This is done through a tee tap. The connections must be insulated with foam. Tee valve terminals must have a standard diameter (3⁄4 inches). Before screwing on the inlet hose, you must check that all rubber seals are present.
Do not go to a water supply with low water pressure. Checking the pressure is very simple. You need to open the tap and then count the number of liters of water that will flow out of the water supply in one minute. Must be at least 8 liters.
At the final stage, you need to plug in the washing machine. But first you need to check that the outlet is working properly. If you have doubts at this stage, it is better to contact an electrician. It is important that the outlet is grounded. It must also cope with the maximum load that the Bosch machine can create.
Powder receiver compartments
Washing machine Bosch Maxx 5 contains a rectangular powder receiver. To pull it out, you need to pull the handle all the way. The stopper will not allow you to pull out the cuvette completely.
The powder receptacle contains three compartments:
Bosch maxx 5 powder receptacle
- First compartment(on the right) is marked with an “I”, so you are unlikely to confuse it. It is necessary for pre-washing and, as a rule, is rarely used.
- Second compartment(middle) contains a drawing of a flower. It is used for conditioner, starch or rinse aid.
- Third compartment(left) marked "II". It is used more often than others. This compartment is used for stain remover, Calgon and powder intended for the main wash.
Powder is poured into the first compartment only in cases where the program provides for it. For example, when washing mixed or very dirty cotton laundry.
An overdose of conditioner, powder, and especially bleach should not be avoided. Because this can harm both the laundry and washing equipment. At large quantities powder occurs. And this can cause a malfunction of the electronic module.
Starting the wash
You should not turn on the bosch maxx 5 washing machine immediately after connecting it. First you need to check whether the tap-tee is open. You should also check whether water flows by gravity into the washer tank.
If everything is in order, then you need to perform the following steps:
- Turn on the washing machine by pressing the “on/off” button;
- Close the hatch;
- Add a little powder to the powder receptacle compartment intended for the main wash. Then push the tray in.
- Using the program selector, select the laundry washing mode at 900C.
- Press the “start” button. Wait until the washing process is completed. After the machine stops working, it can be used as usual.
Starting the washing machine when washing clothes should be done in the same way as when starting it for the first time. But you need to pour in more powder and pre-sort the laundry before putting it in the machine.
To reload laundry during washing, you must press the “start” button. One of the messages should appear on the display. Additional loading can be performed if the message “Yes” is displayed. If the message “No” appears, additional loading cannot be performed. Next, you need to press “start” and the washing process will continue.
It should be noted that the washing program can be changed during its execution. In this case, you need to press “start”, then set the washing mode selector to the required position. Next, you need to press “start” again. As a result, the old washing program will be canceled and a new one will start from the beginning.
Equipment care
The Bosch washing machine will last quite a long time with proper care. The washing machine hatch should be left slightly open at the end of each wash. Otherwise, air will not get inside the machine and an unpleasant odor or mold may appear. The powder receptacle should also be left open.
After washing, you need to wipe the hatch cuff with a cloth. The same is done with the inner surfaces of the drum and the powder compartments. Dirt quickly accumulates in the garbage filter, so it needs to be unscrewed and washed after every 4-5 washes.
You should also check the pockets of your clothes before putting them in the washer drum. Small objects should not remain in them. After using washing equipment, be sure to close the tap.
Do not overload the washing machine with a large amount of laundry. Also, do not put in excessive amounts of rinse aid or detergent. If the machine malfunctions, an error code appears on its display. In this case, you need to contact a service center for help.
Hello!
Place of purchase - MediaMarkt store.
The price at the time of purchase is about 16,000 rubles.
Machine parameters.
Length - 60 cm.
Width - 40 cm.
Height - 85 cm.
Design. The design of the machine is quite simple and does not excite me much. It is made in the usual white color. But that's not a bad thing. It fits perfectly into the interior of a bathroom with a white bathroom. technology.
Washing machine operation.
- The machine turns on after selecting a washing program and pressing the Start button.
- After the wash has started, drum door is locked and it is impossible to open it during washing.
- Also There is a child lock feature.
- During washing, I practically don’t hear it, but during the spin cycle it makes itself felt. She shakes a little, but doesn't move around the bathroom.
- At the end of the wash, the machine loudly signals its completion several times.
In terms of functionality, the machine is not particularly diverse. washing modes.
And yet, almost all modes are needed and used by me.
They cannot be regulated. That is, if there is a Cotton mode of 40 degrees, then you cannot increase the temperature to 50. The washing time cannot be changed either.
Certainly, can be used additional features , but more about them below. Also You can adjust the number of revolutions during spinning.
Cotton 40 degrees. I almost always wash things on this mode. Things wash well and do not get washed out.
Cotton 60 degrees. I mainly wash towels and bed linen on it.
Cotton 60 degrees Eco. This mode allows you to save energy by reducing the amount of water consumed, but it also increases the washing time.
Super fast wash 30 minutes. I often use this mode. If the item is not heavily soiled, and if it is fresh contamination. Things wash well on this mode.
Super fast wash 15 minutes. I used this mode several times just to freshen things up. The washing intensity in this mode is higher than in the 30 minute mode.
Important when washing on the last two modes (15 and 30 minutes) Do not overdo it with the amount of powder. Otherwise, there is a high probability that in such a short time the machine simply will not be able to rinse things well. And in these modes you cannot use the additional rinse cycle.
Silk. I wash nylon tights using this mode to avoid the formation of stretch marks.
Wool. In my opinion, this mode was not very successful for the manufacturer. The washing intensity is very, very low. Things just lie in soapy water. And only sometimes the machine makes revolutions. Even very strong stains cannot be removed. It's easier to wash by hand. However, for some reason the rinsing takes place in the usual intensive mode...
Spin. A very necessary feature in this washing machine for me. I often wash by hand. But I can’t spin it like a washing machine. That’s why the machine does the pressing for me.
The maximum number of spin revolutions is 1000.
I take out things a little damp. Dries quickly.
Additional features.
T-shirt. Removing stains. Increases the amount of time of the main wash cycle.
Pre-wash. I use it if things are very dirty.
Easy ironing. I take things out wet.
Extra rinse mode. You can only add one. Moreover, it can only be added, but, unfortunately, cannot be used independently.
This is what it looks like washing machine drum.
Overall, I like the way this machine washes and the available modes suit me quite well. The machine is made qualitatively and soundly. It works in constant intensive mode and has not had a single breakdown in 3 years, which speaks of its quality and reliability. I RECOMMEND to buy!
The Bosch brand has already produced many home appliances that are known for their reliability and functionality. Incredibly popular in the market household appliances use washing machines of this brand.
At the same time, the consumer has a wide choice, because the manufacturer develops various models of devices, improving them every year. The new generation Bosch Maxx 5 washing machine is one of the most popular models. Let's find out its characteristics and operating instructions.
The very first thing any housewife pays attention to when choosing a washing machine is the programs for each type of fabric. After all, the things you wash should not only be cleaned as a result of washing, but also retain their shape and color.
On the labels, most often, you will only find instructions on the mode or temperature required for washing. But the Bosch Maxx 5 washing machine already has 11 default programmed modes, each of which is clearly described in the instructions. All you need to do is determine the type of fabric (using the same label), put the items within the weight norm in the machine and select the washing mode.
- "Cotton". This option is used when washing natural durable fabrics that do not deform as a result of exposure to high temperatures (up to 90 o). Often these are towels, diapers, kitchen napkins, pillowcases, duvet covers and sheets, less often sweaters, shirts, trousers. When you are not sure whether your item can be washed in this mode, look at the label. If it lists other materials besides cotton, then choose a different mode or you can adjust this one. So, instead of a temperature of 90 o, set it to 40 o degrees, having previously treated problem areas with a stain remover. When choosing this program, count on long time washing. The maximum permissible weight of items that can be washed at one time is 5 kg.
- "Synthetics". If you plan to wash clothes that are made entirely or partially from non-natural fibers, select this option. For such things you should not set the temperature to high. For high-quality cleaning, 30 degrees will be enough. If necessary, you can set a higher temperature for the main wash of 40 degrees. But you can squeeze out such things using the maximum number of revolutions. Remember, if clothes containing synthetic fibers are washed at high temperatures, you are unlikely to be able to wear them again. Do not place more than 2.5 kg of clothing in the drum.
- "Mixed laundry". The new generation Bosch Max 5 washing machine is designed for very economical and convenient washing. You don’t have to wait until you have the amount of synthetic and cotton underwear required for washing, and then spend half a day doing 2 washes. Wash what is already in the basket together by selecting this program. This will allow you to save on water and electricity, and also take less time. If you choose this mode, do not put more than 2 kg in the drum.
- "Jeans". The name of the program itself already indicates the type of fabric for which it is intended. For many people, denim items are the most popular, which means the corresponding option in the washing machine is quite appropriate. Do not forget that the maximum permissible weight of items that can be washed at a time is 2 kg.
- "Thin Linen". Those things that you previously carefully washed only by hand can now be safely sent to automatic washing. You can put scarves, blouses or underwear made from expensive and delicate fabrics in the machine and select this program. The washing process is carried out at an acceptable temperature (30 o), and for spinning thin materials No more than 600 rpm is needed. If you use this option, do not put more than 2 kg in the drum.
- "Wool". Lovers of soft and warm clothes know how tender they are. Therefore, the Maxx 5 model of the Bosch washing machine has a special option for natural items. Even if your sweater is only half wool, use this program. After cleaning, the item does not become deformed. During operation, the device stops several times for a long time so that the clothes lie in a solution of water and a cleaning agent. At the default temperature of 20 o, not a single thing will go bad. Do not place more than 2 kg of wool in the drum.
- "Super fast 30/15". When you just want to “refresh” things, then this option is exactly what you need. The device washes, rinses and spins clothes in just half an hour. When setting up this program, remember that it is not advisable to load more than 1 kg of things. And if you select the additional SpeedPerfect option, the entire process will be halved in time. This program does not provide for high water temperatures, since it takes more time for the heater to work.
- "Night program". To save your time as much as possible, turn on the device at night, and in the morning simply spin it out (selecting a separate option) and hang things out to dry. The peculiarity of the program is that the device operates as quietly as possible and does not signal the end of the washing process. If you choose this mode, then do not put more than 2 kg of things in the drum.
- Separately, you can set the “Rinse” mode. Of course, each program described above rinses things by default. But some clothes (for example, children's) need to be rinsed additionally so that the smell of detergent does not remain on them. This is also true when hand washing or soaking. Place the already cleaned item in the device, because it will cope with rinsing better, using less water.
- “Spin” can also be used separately when it comes to previously washed items. Any of the above types of washing can be accelerated when you set the program, press the SpeedPerfect button. The exception is the “Wool” mode, since in order to fully clean and preserve things, the machine must stop several times.
Installation and first launch instructions for users
Before use, any washing machine must be properly secured. It is also important to decide on the location. It may even need to be prepared in advance. So, if the surface in the bathroom or kitchen where you plan to install Bosch Max 5 is uneven, then start preparing it (small repairs may be required).
This is important, because if the unit stands on a slope, its spare parts will quickly become unusable. Moreover, during operation the device vibrates a little, and on a crooked area it can even move noticeably, which will also speed up the breakdown.
So, before installation:
- As mentioned above, take care of the area where the device will stand. If the situation is not critical and the floor is generally level, but the level shows a slight deviation, then you can adjust the legs on the washing machine itself.
- Pre-prepare the water supply and drainage system in the bathroom, kitchen or other room, and also install a special outlet for rooms with high humidity.
- Calculate the size of the niche for the device so that after installation there is free space on all sides (at least 1 cm).
Here is a small instruction - a diagram of actions after the device is purchased by you and delivered:
- Carefully remove the container.
- Make sure the body is intact. If there are visible flaws and, in connection with this, you plan to issue a return/exchange, you should not even plug the device into the outlet. Once you have verified the integrity, proceed with the installation.
- There are special latches attached to the back of the device for movement. They are needed to ensure that the drum does not accidentally move during transportation. They must be removed before use. You can do this using the instructions in the manual for the Bosch Maxx 5 washing machine. Do not get rid of them completely; bolts may be needed.
- Pipes for water intake and drainage are also initially fixed. It is not difficult to remove them, but this must be done after placing the machine in its place, immediately before connecting it.
- In order to place the Bosch Maxx 5 SpeedPerfect without a slope, place a building level on top and adjust the supports until the indicator shows that the device is level.
- When connecting the drain hose directly to a drain pipe, remember important point. The machine sleeve must be raised above the level of the pipe so that water remains in it after each wash. It is needed to prevent unpleasant odors from entering the device.
- Next, ensure the flow of water. To do this you will need a tee tap. This part is screwed to the hole in the water supply pipe. Then connect the faucet and the device sleeve, filling the space between all joints with special rubber bands for sealing.
- Only after all the manipulations described above, plug the device into a power outlet. Make sure the fork is completely dry first.
Remember, one of the important rules is that the pressure with which water enters your home must be normal (not low). To check whether it is strong enough for the machine to work properly, open the tap and fill the bucket with water for a minute. If during this time about 8 liters have accumulated, then the pressure is good.
Main Features
Before you buy and start using the Bosch Maxx 5 SpeedPerfect washing machine, find out about its main distinctive features:
- Things are loaded from the front; the device has round doors made of durable transparent glass;
- In terms of operating efficiency, the Bosch Maxx 5 series washing machine is classified as class A;
- 5 temperature modes from 20 o to 90 o degrees;
- On average, for one wash the device takes 40 liters of water;
- The program is set using an electronic keypad;
- There is a special program that allows you to delay the start of work for a certain time;
- The device has a display that displays information about the set mode and possible errors, as well as the time before the wash starts;
- The number of rotations for spinning clothes is 1000 revolutions. The spin efficiency of the Bosch Maxx 5 washing machine was rated C by experts;
- You can use a key combination to lock the control panel;
- The device uses a signal to indicate the end of work;
- The Bosch washing machine of the Maxx 5 generation has standard sizes, namely an area of 60x40 cm and a height of 85 cm;
- The device is not built into furniture or under the sink. Standard design and dimensions for stand-alone installation.
Pros and cons
If you have little time to analyze the information and make a choice in favor a certain model, we suggest reconsidering the main advantages and disadvantages of the Bosch Maxx 5 series washing machine, which are not mentioned in bold in the operating instructions.
Let's start with the good properties:
- The device received the maximum rating from experts in terms of performance. It is generally accepted that automatic devices for washing category “A” they clean things well from dirt and preserve the color and shape of fabrics;
- Thanks to a variety of programs that can be adjusted and supplemented, it is suitable for cleaning almost all things;
- Convenience and ease of operation;
- A special feature of the Bosch Maxx 5 SpeedPerfect series is the ability to speed up any wash with the press of one button;
- Beautiful design;
- Possibility to select silent mode.
Separately, we can note the fact that the Bosch Max 5 generation washing machine has the most understandable operating instructions. Compared to manuals issued for equipment earlier, everything in it is written in easy-to-understand language.
There are also some nuances:
- The unit can hardly be called compact by modern standards;
- With a maximum allowable laundry weight of 5 kg, most items can still be washed in quantities not exceeding 2 kg.
Dimensions
Like most devices with horizontal loading, the Bosch Max 5 series machine takes up a significant area in the bathroom of a small apartment, especially since the instructions require a distance from the walls (at least a centimeter).
The dimensions of the device can be called standard:
- Height 85 cm;
- Depth 40 cm;
- Width 60 cm.
However, compared to the previous generation of laundry appliances from the leading German manufacturer Bosch, the Maxx 5 model is more sophisticated and spacious.
Frame
For more detailed description We will provide the external characteristics of the Bosch device model Maxx 5:
- Like the size, the body color of the device is standard white;
- The rim of the round doors is black or silver-gray, made of plastic, the main part is made of durable glass;
- The body is one-piece, the upper part cannot be disassembled (like built-in machines).
Model series
Bosch Maxx 5 SpeedPerfect is a new generation model, key feature which is the ability to speed up the automatic washing time.
Energy and washing class
In terms of electricity consumption during operation, this model was classified as class A. This means that the machine is one of the most economical devices, according to the international classification.
Luke
Things are loaded from the front; the device has round doors made of durable transparent glass. The rim of the hatch is black or silver-gray, made of plastic. For ease of loading laundry, it opens 180° to the side.
Control
The program is set using an electronic keypad.
Load Type
Bosch Max 5 is an automatic washing machine with horizontal loading of clothes.
Functions
The device has 11 default washing modes programmed. You can use the “Spin” and “Rinse” functions separately.
Spin
The spin function can be used separately when it comes to previously washed laundry.
Indication
The device has a display that displays information about the set mode and possible errors, as well as the time before the wash starts. When you select any of the options, a small indicator next to the label indicating it lights up in red.
Beep
This function is present in the device. Moreover, the sound can be adjusted using special settings.
Reviews and video instructions
This video demonstrates in detail the features internal structure device using the example of bearing repair:
Equipment care
Repair specialists and brand developers predict at least 10 years of trouble-free operation for the Bosch Maxx 5 series washing machine, provided that the instructions that come with it are strictly followed by the owner.
We will highlight the main points, if followed, this equipment will serve you for at least ten years:
- Even at the stage of choosing a washing machine, think about your safety and the protection of the device from voltage surges. To do this, purchase and install a special installation for protective shutdown(RCD). If a failure occurs and the voltage rises beyond normal limits, this switch will not only save the microcircuits in the machine from burning out, but will protect you and your loved ones from a strong electric shock.
- Clean the filtration compartment at least twice a year. It is located in the lower left corner on the front side of the device.
- When the washing process ends, remove the detergent box and remove the water from it. Press down on the blue plastic part located in the air conditioner compartment.
- The weight of the laundry should not exceed the specified norm. For each Bosch Maxx 5 program, the instructions clearly state the maximum permissible weight.
Debris may remain in the space between the rubber band that protects the hatch from leaks after washing. As a rule, these are parts of clothing (pins, buttons) or small contents of pockets (receipts, toothpicks, coins, etc.).
Pull back top part rubber cuff, remove these objects and wipe the surface with a sponge. This way, you can avoid unpleasant odors from washed clothes.
The brief operating instructions are intended to be a guide that will help you quickly understand your new washing machine. If the instructions are expanded, then it is inconvenient to read, and many users simply will not do it, but will begin to study their new Bosch Maxx at random, which can lead to problems. After thinking a little, we decided to release a shortened version of the instructions for the Bosch Max 5 washing machine, collecting in it all the most basic things and discarding the “water”. And this is what we got.
Install and connect
The Bosch Maxx 5 series washing machine requires secure installation on a reinforced surface. During the spin cycle, the washing machine can move due to strong vibration, so it is very important to set it level, and it is better to additionally secure the legs statically to fix the body.
Warning! The Bosch Maxx 5 washing machine is very heavy, so be careful when moving it from place to place.
After unpacking the machine, check if the case is damaged. If damage is discovered, you need to take measures to return the equipment to the store, do not even try to plug it into the network. If the case is intact and there are no complaints about the packaging, you can proceed with installation. Before moving the washing machine, make sure that everything is fine in the place where you will place it.
- The floor was reinforced. It is not necessary to level it perfectly, because there are twist-out legs at the base of the washing machine body, but it is still advisable.
- Outlets from the water supply and sewer pipes were organized. In addition, a special moisture-resistant one must be made.
- There was enough space between the items to place the body of the washing machine so that the gap on all sides was at least 1 cm.
On the back wall of the Bosch Maxx machine of the fifth model there are transport bolts, the purpose of which is to secure the drum while transporting the washing machine; they must be unscrewed. Put them somewhere away, but don’t throw them away, they may come in handy in the future. Plug the resulting holes. The inlet and drain hoses also need to be removed from the fixing fasteners, but only after dragging the machine to the installation site.
Next, we take a building level, place it on the lid of the machine and begin to unscrew its legs one by one until we manage to level it. The permissible deviation is no more than 2 degrees. After this, connect the drain hose to the sewer pipe. Here it is very important to provide a bend to the hose so that water stands in the elbow. It will not let foreign odors from the sewer into the machine. The optimal connection height is 60 cm.
At the next stage, we connect the inlet hose through a tee tap to the outlet of the water pipe, not forgetting to insulate the connections with a fuser. The diameter of the tee tap leads is standard, ¾ inches. Before screwing on the inlet hose, check that all rubber seals are in place.
Attention! Do not connect the washing machine to a water supply where the water pressure is very low. You can check this by opening the tap and counting the amount of water that flows out per minute (must be at least 8 l/min).
Lastly, connect the washing machine to the power supply. Before inserting the plug into the outlet, make sure that it is not exposed to water. In addition, the outlet must be fully operational. If in any doubt, contact an electrician. The main thing is that the outlet is grounded and can withstand the maximum load that a Bosch washing machine can create.
Understanding the powder receptacle
The washing machine of this brand has a standard powder receptacle with a classic rectangular shape. You can pull it out by pulling the handle all the way. A special stopper will not allow you to pull out the cuvette all the way. When you pull out the powder receptacle for the first time, you will see 3 compartments.
- Compartment No. 1 (when viewed from right to left) is marked with the Roman numeral “I”, so it is simply impossible to confuse it. It is designed for pre-washing, so you won't use it often.
- Compartment No. 2 (located in the middle) is marked with a flower design. Air conditioner, starch or rinse aid should be poured into this compartment.
- Compartment No. 3 (when viewed from right to left) is marked with the Roman numeral “II.” We will use this compartment most often. Powder for the main wash, Calgon, and stain remover are poured into it.
Pour powder into compartment No. 1 if the program includes pre-wash. In particular, pre-washing may be required when we wash very dirty cotton or mixed laundry. Do not overdose on powder, conditioner, and especially bleach. This can damage not only the laundry, but also the washing machine (increased foaming from excess powder can damage the electronic module).
How to start washing?
After connecting a washing machine of this brand, do not rush to press the “on/off” button. First, check whether the tee tap is open and whether water is flowing into the tank of the machine by gravity. If everything is fine, perform the following manipulations.
- Turn on the machine by pressing the mentioned button.
- Close the hatch tightly.
- Add some powder to the main wash compartment of the powder receptacle and push the tray back in.
- Find the program selector on the control panel and use it to select the washing mode at 90 0 C.
- Press the “start” button and wait until the wash finishes. As soon as the washing machine stops working, we can assume that the machine is ready for normal operation.
When starting up your Bosch washing machine for the first time, do not put laundry in the drum under any circumstances. The program must be implemented empty.
To wash the laundry, proceed in the same way as when you first started it, only add more powder and do not forget to sort the laundry before putting it in the machine. Having selected a program, press the “start” button and wait for the wash to finish. If during the washing process you need to reload the laundry, press “start” again, and then wait until one of the messages appears on the display. “Yes” will mean that additional loading is possible. Open the hatch and throw in the forgotten laundry. “No” means that additional loading is not possible. To continue washing, press “start” again.
During the implementation of the program, you can change it. To do this, press “start”, turn the mode selector to the desired position, and then press “start” again. The old program will be canceled, and the new one will start from the very beginning. If you mistakenly chose a high-temperature wash, then cancel it too, only instead of the new mode, select “rinse”, it will help cool the laundry and thereby minimize the negative consequences.
Care and safety: basic rules
It is necessary to take care of your Bosch washing machine, and then it will serve for a long time. After each wash, be sure to leave the hatch slightly open to allow air to enter. Otherwise, mold may form in the washer and create an unpleasant odor. You also need to leave the powder receptacle slightly open.
After finishing washing, wipe the cuff of the hatch with a cloth, internal surfaces drum, internal compartments of the cuvette for powder. It is also necessary to unscrew the garbage filter once every 4-5 washes and wash out the dirt that accumulates there during this time. Be especially careful when putting laundry into the machine, do not forget to check the pockets so that small items do not fall into the drum and from there into the tank. When you are finished using the machine, be sure to close the tap.
For safety reasons, keep small children away from the washing machine. Don't overload the machine with too much laundry. Do not add too much detergent or rinse aid. If, after turning on, the machine refuses to wash and displays an error code, you should immediately contact an authorized service center.
So, we consider the instructions indicated in our abbreviated version to be the most important. If you want to get acquainted with a detailed version of the instructions for the washing machine of this model, then nothing could be easier, because it is attached to this publication. Good luck!