Fire door DPM-01/60 (EI 60) right 1000 x2100 The door consists of a frame and a leaf. The frame is made of a steel sheet bent into a complex profile; the internal cavity of the profile in the area of the vestibule is filled with heat-insulating material. The frame is a rigid structure and at the same time forms a platband. A box-type canvas is hung onto the frame using adjustable hinges. The internal cavity of the canvas is filled with heat-insulating materials, laid in an order and quantity that ensures a given fire resistance limit. The door leaf of a single-leaf door is equipped with a latch lock, which ensures that the leaf engages with the frame in the area of the vertical post of the frame. A thermal sealing tape is installed around the perimeter of the door frame, filling the gaps between the door leaf and the frame in the event of a fire. On the hinge side of the frame there are fixed anti-removable crossbars. The door has soundproofing properties (up to 35 dB).
Fire resistance limit, minutes -60 Response inertia, sec., no more than -15 Door opening force in the initial period, kgf, no more than -30 Type of closing drive - local Type of opening drive - manual.
Standard delivery set of fire doors: Corner frame without threshold; Painting with epoxy-polyester powder paint according to RAL 9016 standard; Mortise cylinder latch lock GBS-81 (made in Germany); Euro cylinder with a set of keys (made in Germany); Lever handles in black or white on a decorative strip (made in Germany); Hot smoke seal (thermal intumescent seal); Mounting kit (anchor screws)
Additional equipment: Door leaves made of galvanized steel, painted with weather-resistant powder paint; End box; Covering box - wall thickness from 100 to 30 mm; Mortise lock with anti-panic function GBS-83; Master key system; Handles in Matte Chrome; Single closer for doors weighing up to 120 kg; Closer for double-leaf doors with coordination of the shutter closing sequence; Rubber seal against cold smoke; Frame with a low, high or attached* threshold (*- it is possible to retrofit a standard door without a threshold with an attached threshold directly at the customer’s site); Retractable threshold; Installation of the door on site without finishing.
Single-floor metal fire doors are designed to protect openings in the enclosing structures of buildings and structures for various purposes from the spread of fire and its dangerous factors. The doors are designed for operation in heated rooms in the temperature range from +1 to +40 degrees, in explosion-proof environments. Service life before decommissioning is 20 years.
The series was developed in accordance with the requirements of GOST 30247.0-94, TU 5262-006-45881400-00; TU 5262-005-45881400-99; TU 5262-005-45881400-98; TU 5262-004-45881400-99. Additional information Fire doors are certified. Certificate fire safety-SSPB.RU.UP001.V04614, compliance -ROSS RU.BB02.N01347.
Specifications:
Execution right Construction opening, mm 1000x2100 Box size, mm 950x2075 RUB 12,180
When a fire occurs in a spacious room, it is important to localize the fire site by isolating it in a short time. Moreover, it is urgent to stop the supply of oxygen that supports combustion.
For these purposes, fire protection structures are installed. They become a fire barrier and prevent further fire in the room.
Operation
The single-leaf metal fire door DPM 01 60 was specially manufactured for installation in doorways of various buildings:
- administrative institutions;
- residential buildings;
- public buildings.
Such metal fire protection products perform important function, they protect the object from the possible spread of fire. The most popular model was the fire-fighting series “DPM 01 60”.
Fireproof door structure
Installation of the “EI 60” model is carried out in openings made of various materials:
- bricks;
- concrete;
- aerated concrete.
A metal fire protection structure consists of several elements:
- door block;
- canvas;
- locks;
- thermal seal;
- closer;
- retractable threshold.
Metal single-floor models “DPM 01 30” are considered a lightweight version of this design.
Design nuances
Fire doors of the DPM-1 brand of any size are distinguished by a complex design. Their blades are made of steel. The size of each product is standardized and is 1050 x 2075 mm.
To install the canvas, the opening dimensions must be within 900 x 2100 mm. In this case, the door frame takes on the role of the platband in this design.
Fire resistance is ensured by a steel box filled with a special mineral fire-resistant material with the following properties:
- does not melt at temperatures above 130 degrees;
- no toxic substances are released during combustion;
- retains its original appearance even after a fire.
Mainly used mineral wool with a high content of basalt. This fireproof material has certain mechanical properties that ensure a dense filling of the door block.
The double-leaf metal fire door type “DPM 02 60” has a resistant design. Its entire perimeter is covered with a special thermally expanding tape. When the temperature begins to rise and reaches its maximum, the tape foams and expands. As a result, it fills all the free space between the frame and the door leaf.
Door "DMP 02 60" Adjustable hinges are welded to the door frame. Canvas weighing more than 100 kg are hung on them. To prevent such a mass of the product from deforming the hinges, they are manufactured with a threefold safety margin. Each hinge is equipped with an anti-removal bolt. It is simply impossible to dismantle such a system without using special tools.
For the manufacture of the sash, a steel sheet is used, the thickness of which exceeds one millimeter. The inside of the door frame, similar to the door frame, is filled with tightly compacted fiber insulation.
The leaf hermetically closes the doorway. It is secured with a special cylindrical lock equipped with handles. They are coated with a durable polymer that practically does not conduct heat.
To increase the reliability of single-floor and double-floor metal structures of fire protection products, they are equipped with retractable thresholds, as well as door closers.
When it is impossible to install an ordinary threshold, an automatic system, the so-called “retractable threshold”, is installed. It is attached to the canvas so that, if necessary, it becomes a replacement for the conventional structure.
Fittings for fireproof construction This mechanism is made of aluminum. A box is welded into which the seal is tightly placed. When the door is in the “open” position, the sealing material is hidden inside the frame. As soon as the door begins to close, the automatic system is activated and the threshold drops down. Thanks to the seal, the gaps between the bottom end of the door and the floor are closed.
To ensure that the door closes tightly in automatic mode, a closer is installed. It is equipped with a spring-loaded lever that presses the door against the block. For the door closer to start working, you just need to give the partition a certain direction of movement. The design of the closer has several types:
- external, attached to the ceiling;
- floor;
- inside the door.
Types of fireproof sealing sheets
If the door is marked “DPM”, it means it is a fire-resistant steel sheet. The number "01" indicates that this is a single-field design.
The marking indicates the time, for example “60 minutes”, during which such a structure will not collapse, will not burn out and will remain standing.
These models are available with a solid leaf or with glass inserts, such as the fire-resistant metal door from the “EI 60” series. The glazing area occupies no more than 25% of the entire EI60 door.
Finnish fire doors of the “EI 60” series are equipped with special double-glazed windows made from several sheets of heat-resistant material. The free space between the sheets is filled with fireproof gel.
Built-in window on the doors of the “EL 60” model When the substance inside begins to heat up, it foams. As a result, the thermal conductivity of the EI60 door is sharply reduced. At this time, the transparency of the gel becomes zero. Ultraviolet radiation does not penetrate into the room.
The glazing of the door leaf does not in any way affect the properties of a fire-resistant metal door "EI60"
The appearance of fire-fighting products brand “DPM 01 60” is given by a special modern heat-resistant polymer dye. It has a white tint, but there are other colors available in the market.
Glass that is equipped with the fire door model “EI 60”
Designs such as “EI60” often have beautiful inserts made of fire-resistant glass. They are able to prevent smoke from entering the room for one hour.
These models become fire-resistant protection for everyone who is in the room during a fire. During this time, people manage to leave the premises through the fire exit. Glass can withstand temperatures up to 180 degrees.
How fireproof and high quality model“DPM 01 60” can be seen by watching the video.
Single-leaf fire doors EI-60 are a fire-resistant structure of one leaf, which is fixed to the frame frame. A metal door with a single leaf is optimal for installation in standard openings. Such an entrance block is often installed in residential buildings and openings that lead to technical and utility rooms with a high risk of fire.
- Fireproof fittings. The door leaf is equipped with special fittings and accessories that are insensitive to elevated temperatures. Doors with an “Anti-panic” system are in high demand, which facilitates quick and safe evacuation from the building in the event of a fire.
- Special finishing of the canvas. Practical and durable materials are used to finish the fire door leaf. As standard, the doors are coated with primer paint in various shades. This material is characterized by high corrosion resistance, durability, and immunity to moisture. At the buyer's request, single-leaf fire doors are decorated with other materials. For example, anti-vandal powder coating can be applied to a cold-rolled steel sheet.
- Fire resistance limit. Single-sex metal doors differ in fire resistance limit - the time period during which the structure restrains the pressure of fire. Doors Tor products are characterized by fire resistance from EI-30 to EI-60. Branded doors provide the ability to evacuate people and property from the building within an hour.
Advantages of single-leaf fire-resistant doors from the Doors Tor company
The price of fire doors mainly depends on the design features and the quality of the heat insulators and thermal seals used in the product. Fire doors with glass look original and are more expensive than entrance blocks with a blank panel.
The manufacturer "Doors Thor" equips its fireproof products with modern and reliable materials:
- IZOBEL basalt slab;
- self-adhesive Doorlock seal;
- thermal expansion tape GLUSKE.
Construction opening, mm 800x2100
Construction opening, mm 900x1900
Construction opening, mm 900x2100
Construction opening, mm 950x2100
Construction opening, mm 1000x2100
Download the application form for a fire door Download file:
View online file:
DPM-01 EI 60 fireproof metal entrance door, single-leaf, solid, with a fire resistance rating of EI60. Entrance door DPM-01 EI 60 is a metal single-leaf solid door with a fire resistance rating of EI60. The door consists of a frame and a leaf. The frame is made of steel sheet bent into a complex profile, the internal cavity is filled with heat-insulating material. The frame is a rigid structure and at the same time forms a platband. A box-type canvas is hung onto the frame using adjustable hinges. The internal cavity of the canvas is filled with heat-insulating materials, laid in an order and quantity that ensures a given fire resistance limit. The door leaf of the single-leaf fireproof door DPM 60 is equipped with a latch lock that ensures the door leaf engages with the frame in the area of the vertical post of the frame. A thermal sealing tape is installed around the perimeter of the door frame, filling the gaps between the door leaf and the frame in the event of a fire. On the hinge side of the frame there are fixed anti-removable crossbars. The fire door DPM 01/60 has soundproofing properties (up to 35 dB).
Attention! You can buy a fire door DPM-01 60 taking into account individual sizes and wishes for the customer’s configuration!
Fire resistance: 60 min.
Operation warranty - 10 years
The fire door DPM 01/60 has soundproofing properties (up to 35 dB).
Delivery set of fire door DPM-01 60
- canvas, sheet thickness 1.5 mm;
- internal folded sheet, sheet thickness 1.5 mm;
- thermal insulation – hydrophobized energy plate;
- end box;
- cylinder mortise lock – “APECS”;
- black push-action handles;
- cold smoke seal;
- thermoactive sealant “Ketafix Flexpan - 200”;
- epoxy-polyester powder paint, standard colors: RAL-7035, 7032, 5005, 8017, 9016.
Additional equipment:
- closer - a device for self-closing the door
- additional platband
Technical characteristics of the fire door DPM-01/60
Fire resistance limit, minutes 60
Response delay, sec 15
Door opening force in the initial period, kg 30
Sound insulation, dB 35
Closing drive type: local
Opening drive type: manual
Description of design
The door consists of a frame and leaf. The frame is made of steel sheet bent into a complex profile; the internal cavity of the profile in the area of the vestibule is filled with heat-insulating material. The frame is a rigid structure and at the same time forms a platband. A box-type canvas is hung onto the frame using adjustable hinges. The internal cavity of the canvas is filled with heat-insulating materials laid in the order and quantity ensuring the specified fire resistance limit. The door leaf of a single-leaf door is equipped with a latch lock that ensures the door leaf engages with the frame in the area of the vertical post of the frame. A thermal sealing tape is installed around the perimeter of the door frame to fill the gaps between the door leaf and the frame in case of fire. On the hinge side of the frame there are fixed anti-removable crossbars. The door has soundproofing properties (up to 35 dB).
Technical characteristics
- Fire resistance limit minute -30
- Response delay sec. no more than -15
- The door opening force in the initial period kgf is no more than -30
- Closing drive type - local
- Opening drive type - manual
Fire door delivery set
Standard:
- Corner box;
- Painting with epoxy-polyester powder paint according to RAL 9016 standard;
- Mortise cylinder latch lock GBS-81 (made in Germany);
- Euro cylinder with a set of keys;
- Lever handles in black or white on a decorative strip (made in Germany);
- Hot smoke seal (thermal intumescent seal);
- Mounting kit (anchor screws)
Additional equipment:
- Door leaves made of galvanized steel, painted with weather-resistant powder paint;
- End box without threshold;
- Covering box - wall thickness from 100 to 30 mm;
- Mortise lock with anti-panic function GBS-83;
- Master key system;
- Handles in Matte Chrome;
- Single closer for doors weighing up to 120 kg;
- Closer for double-leaf doors with coordination of the shutter closing sequence;
- Rubber seal against cold smoke;
- Installation of the door on site without finishing
Directions for use
Single-floor metal fire doors are designed to protect openings in the enclosing structures of buildings and structures for various purposes from the spread of fire and its dangerous factors.
The doors are designed for operation in heated rooms in the temperature range from +1 to +40 degrees. in explosion-proof environments.
Service life before decommissioning is 20 years.
The series is developed in accordance with the requirements of GOST 30247.0-94
TU 5262-006-45881400-00; TU 5262-005-45881400-99;
TU 5262-005-45881400-98; TU 5262-004-45881400-99.
Additional data
Fire doors are certified. Fire safety certificate -SSPB.RU.OP019.V01204 compliance -ROSS RU.BB02.N00833.
Specifications
Execution - right
Construction opening mm - 1000x2100
Box size mm - 950x2075