Sooner or later, owners of suburban areas think about fencing their territory and, accordingly, the need to draw up an estimate for construction. If you want to build a fence at your dacha with your own hands, then you should include in the estimate:
- Cost of materials. To keep your budget minimal and your fence optimal, pay attention to the components and clarify their characteristics. If you want to save money and take thinner, smaller, used metal (especially used corrugated sheets), with the wrong degree of protection, or available material, all this will ultimately affect the beauty and strength of the fence. If you bought unfinished pillars, joists, or gates with a wicket, their production will add to the cost of the final product. Of course, today in Leroy Marlen you can purchase all the necessary materials for the fence. But metal and corrugated sheets Leroy Merlin Most likely it will be quite thin, although cheap. But self-tapping screws, fittings for gates with a wicket and other small things necessary for installation will be expensive. Additional factors influencing the cost of the fence include the presence of wickets and gates, double-sided covering of the sheet, canopy, forging and any other decorative elements, as well as a small supply of material. If we are talking about the need to fence the area with corrugated sheeting and invest in the minimum possible amount, also think about the need for roofing screws, decorative strips on top, mortise locks and some kind of non-standard fittings for gates with a wicket. The fence does not tolerate any excesses to a minimum, so think about the need for concrete work.
- Cost of loading, delivery and unloading to the fence installation site. This important point, which many people forget about when they want to build a cheap fence with their own hands. You will rarely be able to save money here, and even vice versa, because you will most likely order all the components from different places. And if you order profile pipes from a metal warehouse, they are usually six meters long, so cutting them should also be included in the budget.
- Cost of work to prepare the site for installation. Nothing should interfere with the construction of the fence: old fencing, bushes, trees, tall grass, embankments, unnecessary things - along the installation line you need to have a working space of about a meter on each side. Of course, you can do this work yourself.
- Installation cost. It all depends on the complexity of installation: the number of logs, the installation pitch of the posts, the installation method (in concrete or not), the number of gates and gates, whether all components of the fence are ready for installation, whether anything interferes with the installation (soil, buildings along the fence line, neighbors and other). Pay attention to your soil; if it is compacted clay, bulk earth mixed with stones or other heavy soil, then it is unlikely that you will be able to drill through it with an ordinary gas drill and you will have to resort to additional costs for plugging pipes. And then you won’t be able to put up a fence for your dacha with your own hands cheaply. Standard installation of fences made of corrugated sheets, the price for work per 1 meter will cost from 300 rubles. But fencing companies rarely offer work without material, so installing a fence from corrugated sheets at shabashniks will cost from 70% of the cost of the material.
- Associated costs: electricity, gasoline, paint, electrodes, bits, cutting discs, screws and, most importantly, your nerves.
Let's calculate an approximate budget standard fence from corrugated sheets for 6 acres. The configuration of the plots may be different, but most often 6 acres is 30 meters by 20 meters (600 sq.m.), the perimeter will be 100 linear meters. For example:
- a fence of 8 acres is approximately 20 m by 40 m - 120 linear meters. m;
- a fence of 10 acres is approximately 25 m by 40 m - 130 linear meters;
- fences of 15 acres are approximately 30 m by 50 m - 160 lm.
- SNT fences are most often more than 300 linear meters.
To install a fence inexpensively 100 meters long with a gate and a wicket without a foundation, 2 meters high, on 2 logs, we will need 38 posts (metal profile pipe 60x60 mm, wall thickness 2 mm, length 3 meters), 64 logs (metal profile pipe 40x20 mm, wall thickness 1.5 mm, length 3 meters), 87 sheets of C8 corrugated sheets (thickness 0.5 mm), standard gates with a wicket , let's add to this the costs of screws, bits, cutting discs, paint, electricity, electrodes, pole covers, material, delivery and installation.
Offer from the company "Fence at the House" for a fence made of corrugated sheets |
|||
|---|---|---|---|
| as of April 2019 | 130,000 rubles | ||
Do-it-yourself estimate for a fence made of corrugated sheets |
|||
| Name | Quantity | Price | Total cost |
| Pillars | 38 | 474 | 18012 |
| Lags | 64 | 189 | 12096 |
| Corrugated sheet | 87 | 700 | 60900 |
| Gate with wicket | 1 | 15000 | 15000 |
| Delivery | 2 | 6000 | 12000 |
| Installation | 70% of the material | 1 | 82605 |
| Other (screws + bits, paint, abrasives, electricity, electrodes, covers) | 1 | 10000 | 10000 |
| TOTAL for April 2019 | 210613 rubles | ||
The approximate cost of a standard fence made of corrugated sheets as of April 2019 using our own resources in the Moscow region will be about 210,000 rubles. If you use an online real price calculator, the cost of material and installation will be: 120,000 plus 3,000 rubles delivery.
- a 20-meter fence made of corrugated sheets with gates and a wicket will cost 32,000 rubles;
- a 50-meter fence made of corrugated sheets without an entrance - 59,000 rubles, every subsequent 10 meters + 11,800 rubles.
Our company “Fence at the House” works at the lowest prices due to the well-coordinated processing of large supplies of rolled metal in our own production, a well-structured scheme of working with customers and a professional installation cycle on site. We can offer the most competitive price for all our products and therefore we install a lot of garden fences. Thus, if you order a standard fence made of corrugated board from our company, it will be profitable. But you can really save money on a gauge, a strip, roofing screws, and double-sided corrugated sheeting. A significant help to the budget is to order a fence together with your neighbors, but you should take into account the fact that during a joint installation, disagreements may arise regarding the choice of material, color and height.
How to learn to make competent estimates? First of all, you need to practice developing various types documentation compiled according to methodological recommendations and rules according to the type of work. Any estimator will tell you that there is a basic classification of all types of work, according to which the main collections of prices are compiled: construction, installation, repair, commissioning, as well as auxiliary work such as loading, unloading, transportation. So the estimator’s skill lies in selecting the most suitable price from that section of the collection that most accurately describes the composition and features of the work being performed. So, let's take as an example estimate for fence installation. This wording alone will tell little even to a professional estimating professional: after all, it can be like installation metal fence, and construction of brick prices. In the context of specific conditions and scale, both the type of collection and the choice of a specific price are determined. For example, if a planned or major renovation fence, the estimate will include prices from installation or repair collections, while fences made of reinforced concrete or brick will probably be estimated at construction prices.
When drawing up an estimate for a fence, most of its cost will be formed by the main materials: brick, reinforced concrete pillars, mortar, metal sections and gates, wooden products, as well as auxiliary ones: screws, embedded parts, hinges, paints, primers, etc. If they are included in the resource estimate the cost is immediately reflected in current prices, then when using the base-index method of preparing estimates, materials are either taken from price collections of 2001, or transferred from price prices to base indexes. The materials used in the construction of the fence can be allocated in the estimate in a separate section, or “joined” to the prices at which their installation and use in construction or repair work is estimated, when their cost is not taken into account in the price itself. When drawing up an estimate for a fence, it is also often necessary to estimate the preparation for construction and installation works, for example, the marking and planning of the area for the fences being built. Let's consider the use of territorial prices using the example of an estimate for the installation of a metal fence made of steel pipes with "peaks".
An example of calculating the estimated cost of work on installing a metal fence.
| Rationale | Name | Col. | Basic Salary | EkMash | Salary Fur | Total |
| TER01-02-027-05 | Area layout manually, soil group - 2 | 1000 m2 of planned area | 841,32 | 0,00 | 0,00 | 841,32 |
| TER01-02-119-02 | Clearing the area of small forests and shrubs manually with moderate growth | 100 m2 of space | 30,30 | 0,00 | 0,00 | 30,30 |
| TERr51-04-02 | Digging holes for mounting poles and racks up to 0.7 m deep | 100 pits | 3506,97 | 0,00 | 0,00 | 3506,97 |
| TER06-01-005-01 | Manufacturing of concrete foundations for pillars and racks | 100 m3 of concrete in action | 2996,29 | 3089,68 | 357,90 | 70609,31 |
| TER09-03-039-01 approx. | Installation of poles and racks | 1 t of structures | 584,00 | 205,16 | 1,14 | 1083,73 |
| TERm38-01-003-04 | Manufacturing metal fence spans | 1 t | 926,40 | 314,99 | 11,67 | 8151,98 |
| TTS101-9410 | Channel steel | 1 t | 0,00 | 0,00 | 0,00 | -4629,90 |
| SCM103-1571 | Steel square pipes grade st1-3sp/ps: 80x80 mm, thickness 3 mm Price list /4.521 | 1 t | 0,00 | 0,00 | 0,00 | 5996,83 |
| SCM103-1560 | Steel square pipes grade st1-3sp/ps: 25x25 mm, thickness 2 mm (Price according to price /4.521) | 1 t | 0,00 | 0,00 | 0,00 | 5952,19 |
| SCM103-1565 | Square pipes made of steel st1-3sp/ps, size 40x40 mm, thickness 3 mm (Price according to price/4.521) | 1 t | 0,00 | 0,00 | 0,00 | 5768,63 |
| SCM103-1569 | Square pipes made of steel st1-3sp/ps, size 60x60 mm, thickness 3 mm (Price according to price/4.521) | 1 t | 0,00 | 0,00 | 0,00 | 5837,94 |
| Price list | "Pike" forged 75/4.521/1.07 | 1 piece | 0,00 | 0,00 | 0,00 | 15,50 |
| TER07-01-055-01 | Installation swing gates and installation of poles | 100 pcs. | 15211,17 | 15300,5 | 1119,18 | 50774,17 |
| TSC201-0588 | Gates different types with frame, frame, panels filled with steel without opening mechanisms | 1 t | 0,00 | 0,00 | 0,00 | 9087,07 |
| TER07-01-055-08 | Wicket device with installation metal poles | 100 pcs. | 6810,97 | 363,67 | 0,71 | 10408,64 |
| TSC201-0778 | Individual welded structures with a mass of assembly units up to 0.1 t | 1 t | 0,00 | 0,00 | 0,00 | 10175,83 |
| TER15-04-030-03 | Oil painting of rack and welded parts | 100 m2 | 288,59 | 3,28 | 0,09 | 657,76 |
Explanations for the estimate.
This option for estimating the work of installing a metal fence was made for general educational purposes as an example of calculating prices for this type of work. This fragment is a small part of the local calculation, and its use for solving problems other than those originally envisaged is definitely not advisable.
Local estimate compiled in TER Krasnodar region at the basic price level per unit of work or material. The translation of the estimate for installation work into the prices of the current year can be carried out using growth indices for the cost of construction and installation work for the quarter of the desired year.
This example of surveying the installation of a metal fence demonstrates one of the options for drawing up an estimate for the installation of fences. According to a specific technical specification or defective statement, the list of prices for installing fences and gates can vary significantly.
Many customers mistakenly believe that drawing up an estimate is required only when constructing a serious construction project. In fact, it is also necessary to draw up an estimate for the installation of the fence. at the same time to this issue should also be approached with full responsibility. It will be easy to calculate the installation of this structure only at first glance. in fact, these miscalculations have a lot of nuances and features that should be paid attention to.
Main Features
An estimate for fence installation is an important point before starting work. Only after the estimate has been approved by the customer, the contractor can proceed directly to work.
The estimate usually takes into account absolutely all cost items, including, if necessary, the cost of dismantling the previous fence.
Any estimate can be drawn up in any order. There are no strict forms or requirements here. The most important thing is the presence of all required items and calculations.
By general rule the estimate is prepared in printed form in a table. If necessary, it is possible to add footnotes and some explanations at the bottom of the page. After this, the numbered pages of the estimate are printed and stapled. In the future, for reporting purposes, all specified information in the estimate will be confirmed by the receipts provided and concluded contracts for the provision of services or performance of work.
For any object, it is possible to draw up a general estimate for the entire construction or separate separate summaries for each stage. Both options are valid. If we talk specifically about the installation of a fence, it is recommended to include it in a separate estimate, even if this is a stage of a large building construction.
Nuance! If a subcontractor is involved, he submits an estimate to the contractor for approval. This has nothing to do with the estimate specified by the customer. The customer approves only the final estimate, taking into account the services of the subcontractor.
What's included in the estimate
When drawing up an estimate for installing a fence, you should take into account the main cost items that are typical for absolutely any construction project. The main expense items that will need to be included in this financial document include:
- Equipment rental. Sometimes, when installing large structures, special equipment may be required, which not everyone has at their disposal. construction company, so you will need to rent it. Most often these will be the vehicles that deliver and install large blocks. All other equipment (welding machines, hammer drills) is usually available from the builders themselves.
- Hiring workers if labor is needed additional specialists who are not on the company's staff. The estimate must indicate the number of workers, their expected payment and the duration of work on the object. Typically, such specialists are paid based on hours or shifts worked. If they cooperate on on an ongoing basis with the contractor, then they can conclude with him labor agreement, but this is not reflected in the estimate, since all this is included in the list of services provided by the construction company.
- Purchase necessary materials. The estimate indicates prices current at the time of its preparation. Next, it is preferable to immediately purchase everything you need. If this cannot be done, then you need to be prepared for inflationary costs or price dynamics against the background of changes in exchange rates. Usually the price can change by a maximum of 10-15%. The price is stated taking into account the client’s wishes regarding the materials used, as they may differ in quality and price.
Sometimes it is customary to allocate cleaning of the territory as a separate expense item. But this is not always logical for the reason that almost any of the actions taken for this purpose can be included in other sub-items of the estimate (involvement of equipment, workers, vehicles for transportation). This point also sometimes includes dismantling the previous structure. This can be done at the discretion of the financial analyst. The peculiarity of the scheme is that it is quite possible to divide it into sections and categories at your own discretion - this will not be a mistake. The main thing is to avoid any shortcomings and errors in calculations.
Various options
Sometimes the customer may be offered several estimates for approval at the same time. The reason is that costs will vary significantly depending on how high-quality and powerful materials are used for installation.
The cost and scope of work may also be affected. For example, work can be completed faster if more workers and equipment are involved. But the price of such installation will be higher.
Usually, all these nuances are previously discussed with the customer, and wishes are clarified, but if it is difficult to make a final decision, then it would be advisable to draw up several cost estimates at once so that you can clearly evaluate the advantages and the difference in price when receiving them.
What to pay attention to
When drawing up any estimate, including for the installation of a fence, you should take into account some additional features that are paid attention to when checking the estimate. The regulatory authorities and experts stop there and therefore this fact The accountant should also pay attention. When checking yourself, you need to pay attention to:
- adequacy of the declared quantity of necessary machinery, equipment, and workers. This takes into account labor productivity and the necessary work done;
- compliance of the cost of materials with current market prices, as well as the declared volume of purchases for the facility itself;
- the correctness of calculations, as well as the application of calculated coefficients.
In addition to all this, one should also take into account the fact that quite stringent requirements are imposed on such documents at the legislative level. We are talking about the execution of documents and their form. If you make any inaccuracies in the execution of the forms itself, then there is a risk that you will also receive a fine in the future. Therefore, attention should be paid to compliance with legal requirements first of all.
Features of some types
The general model for calculating the costs of installing a fence will always be generally the same. However, sometimes costs may differ slightly depending on what type of fence you decide to install. The main types, for which the estimate will have their own nuances, include the following fences:
- Brick. For such a pick-up, there is no need to use any equipment other than delivery vehicles. The main expense items here will be the purchase of materials (brick, mortar, cement), as well as payment of hired workers. To install such a fence, additional tools may be required (shovels for trenches, containers for mortar), but usually the construction company already has all this, so there is no need to indicate it in the estimate.
- Wooden. Installing a wooden fence requires a minimum of resources. In the estimate it will be enough to simply indicate the purchase necessary materials, as well as workers' compensation. When drawing up an accurate estimate, you can also take into account the purchase of nails and other small parts. The cost of paint is also often taken into account, since usually wooden fences are preferred to be coated with paint to increase their service life. If a fence is made from a picket fence, then the costs will only be for the purchase of materials, since usually they prefer to install such a fence on their own.
- From chain-link mesh. The most popular type of fence due to its low cost and comparative strength. The estimate here should include the costs of paying for the work, purchasing the mesh itself, as well as installing the base posts (purchase of the posts themselves and cement to strengthen them in the ground). The main expense item here is the purchase of the mesh itself. Its cost can vary significantly depending on the thickness of the rods.
- Metal. Any metal fence (welded, made of sheets, with small cells) implies a standard accounting of all costs in the cost estimate. In addition to the costs of paying workers, as well as the purchase of materials, it is necessary to additionally take into account the cost of hiring equipment. The welding machine, as well as specialists in this field, are usually paid hourly. Also in the estimate you will need to include the purchase of paint and the cost of installing the main pillars (their cement fixation in the ground).
- From a professional sheet. A reliable and strong fence that requires quite a lot of money, but is also reliable. You can read more about corrugated board fences.
Each of these types is calculated in the estimate according to the general rule, but taking into account additional individual nuances.
Dismantling
Separately, it is worth dwelling on the dismantling of the fence. The reason is that such calculations are always given separately from the total estimate, even if dismantling simply takes place before the construction of a new fence.
There are no particular difficulties in drawing up such estimates, but you should nevertheless pay attention to some features.
To dismantle the old fence, you do not need to purchase any materials. Here you will only need to take into account the payment of attracted specialists, as well as the rental of equipment. Typically, many construction companies do not have free access to their own equipment, which is required for dismantling. For this reason, it has to be rented.
In some cases, if the fence is not too large and is not made of heavy materials, then it will be quite possible to handle it on your own. Then any additional costs will not be indicated in the estimate, since the provision of such services is included in the list of services of the construction company.
If it is necessary to attract additional resources for dismantling, then usually the cost of attracting workers or special equipment must be included in the estimate. Payment for such services is calculated on a daily or even hourly basis.
It will also be necessary to take into account the costs of transporting the remains of the fence. Sometimes transporting waste and cleaning the area can be carried out by the owner of the site or a construction company. If this is not possible, then you will need to rent a separate vehicle for transporting waste (often an hourly rate).
Often, installation and dismantling of a fence are included in one estimate, but at the request of the customer or for the convenience of the contractor, they can be separated. This will also be required if similar work is performed by two different companies.
The fundamental document that determines the amount of costs for the construction of a fence is the estimate for installing a fence made of corrugated sheets. It indicates the cost of all materials, components, fittings used for construction, as well as the cost of performing main types of work.
The estimate for a fence made of corrugated sheets is prepared mainly on the condition that third-party organizations are involved in the work, but even when you carry out the installation yourself, it will not be superfluous to make a list of consumables and work. If we do not take into account the optimization of financial costs, then at least the assembly time can be planned more accurately.
Fence materials
Selection of profiled metal sheet
A typical estimate for the construction of a corrugated fence includes the following sections:
- Fencing materials.
- Load-bearing structures.
- Consumables and accessories.
- Work on the construction of load-bearing structures.
- Sheathing works.
It is in this sequence that we will describe the sections so that, if necessary, you can create a list with your own hands.
First of all, we need to decide on the choice of corrugated sheeting itself. The following grades of material are most often used for fencing:
- C8 is the most economical choice. The profiled sheet of this brand is characterized by a small wave height, which causes rather modest load-bearing capacities (hence the low price). At the same time, this brand is produced in fairly large sheets, so when constructing large-sized fences, C8 can be used, especially when the requirements for the strength of the fence are low.
Pay attention! Optimal objects for using C8 are temporary fences around construction sites, etc.
- C20 (GL-20)- one of the options most suitable for permanent fences. It is more expensive than C8, but due to its excellent load-bearing capacity it is much better suited for fencing. The high wave prevents the sheet from deforming under the influence of wind load.
- S21- another option suitable for fencing. The meter width of the sheet makes it easier to calculate materials and helps reduce the amount of waste at the junctions of fence sections. The cost is slightly higher than C20, but thanks to the increased profile, this brand of corrugated sheet has greater rigidity.
In addition to the actual grade of material, the cost of the enclosing structure will also be affected by the coating of the corrugated sheet. Absolutely all corrugated sheets used for the manufacture of fences are galvanized.
In addition, to give it an attractive appearance and enhance its anti-corrosion characteristics, the following coatings are used:
- Polyester (glossy - up to 25 microns, matte - 30-40 microns).
- Polyvinyl dente fluoride coating – from 20 to 40 microns.
- Plastisol coating – up to 200 microns.
Profiled sheets with plastisol are the most expensive, but at the same time they can last much longer than standard polyester-coated material.
Load-bearing structures and fittings
The next component, which is mandatory includes an estimate for a fence made of corrugated sheets - these are load-bearing structures.
In most cases, the fence frame consists of vertical supports and crossbars:
- For corner supports installed along the perimeter of the site, we use pipes with a cross-section of 80x80 mm. The pipe can be either round or profiled.
- Intermediate supports should be installed between the corner supports at intervals of about 2.5 meters. The cross-section of such a pipe may be slightly smaller, so it is quite possible to use the 60x60 mm option.
Pay attention! The length of the pipes for the supports depends on the density of the soil and the height of the fence. On average, to erect a 2-meter fence, supports up to 3 - 3.5 m are required.
- Cross members are installed between the pipes, to which the profiled sheets themselves are attached. For crossbars, it is best to take a rectangular corrugated pipe with a cross section of 40x20 mm.
In addition, for a full-fledged fence with a gate or wicket, we will need fittings that ensure their opening and closing. So the estimate for installing a corrugated fence will be supplemented with hinges, a bolt or other locking mechanism, possibly rollers for sliding gates, etc.
It is also necessary to take into account consumables - fastening screws and rivets, electrodes, cutting and grinding wheels, concrete for installing pillars, etc.
Here is an example of an estimate for installing a fence made of corrugated sheets, which indicates the main cost items for the purchase of materials.
Execution of work
Construction of a load-bearing structure
The list of costs for constructing a fence should also include all work performed. If you decide to do everything yourself, then our website contains very detailed video instructions. Well, if the fence will be done by a contractor company, then it is worth pre-coordinating all stages of the work.
Most often the process looks like this:
- The area for the fence is being marked.
- Holes are drilled at selected points to install support pillars.
- A mixture of crushed stone and sand is poured into the holes, which is then moistened and compacted.
- Vertical supports are installed, after which they are concreted.
- Horizontal logs made of thinner profile pipes are welded to the vertical supports.
Hinges are attached to the gate posts.
Covering the frame with corrugated sheets
After erecting the frame, the following operations must be performed:
- The corrugated sheeting is transported to the installation site and, if necessary, cut to the required dimensions.
- Profiled steel sheets are attached to the frame joists using rivets or self-tapping screws. As a rule, this work is performed together with a partner.
- In some cases on top part An end strip for drainage is installed on the fence.
- A gate or wicket is hung on hinges, and a locking mechanism is installed.
To avoid misunderstandings, the cost of each work must be agreed upon in advance. It is most rational to set the price for performing one operation, for example, installing one linear meter of fence. This will make it much easier to make the final calculation.
Fences made from profiled sheets, shown in the photo in our article, have a very reasonable cost. And yet, in order to plan work and optimize financial costs, it is imperative to draw up an estimate, even if only you yourself will see it.
Read about this in other articles on our website.
| Service | Quantity | Price | What does it include? |
|---|---|---|---|
| Installation of a fence made of corrugated board on 2 logs, post spacing 2.5m | p.m. | 230 | Includes: marking the area, drilling holes, driving in posts, backfilling, welding the frame, fastening the corrugated sheet with self-tapping screws, installing a fence strip. Does not include installation of gates and wickets. |
| Installation of a fence made of corrugated board on 2 logs, post spacing 3m | p.m. | 210 | |
| Installation of a fence made of corrugated board on 3 logs, post spacing 2.5m | p.m. | 250 | |
| Installation of a fence made of corrugated board on 3 logs, post spacing 3m | p.m. | 230 | |
| Installation of a fence made of Euro picket fence on 2 logs, post spacing 2.5m | p.m. | 340 | Includes: marking the area, drilling holes, driving in posts, backfilling, welding the frame, fastening the picket fence with self-tapping screws, installing a fence strip. Does not include installation of gates and wickets. |
| Installation of a fence made of Euro picket fence on 2 logs, post spacing 3m | p.m. | 320 | |
| Installation of a fence made of Euro picket fence on 3 logs, post spacing 2.5m | p.m. | 380 | |
| Installation of a fence made of Euro picket fence on 3 logs, post spacing 3m | p.m. | 360 | |
| Installation of a fence made of Euro picket fence (in a checkerboard pattern) on 2 logs, post spacing 2.5m | p.m. | 400 | Includes: marking the area, drilling holes, driving in posts, backfilling, welding the frame, fastening the picket fence with self-tapping screws - logs on both sides, installing a fence strip. Does not include installation of gates and wickets. |
| Installation of a fence made of Euro picket fence (in a checkerboard pattern) on 2 logs, post spacing 3m | p.m. | 380 | |
| Installation of a fence made of Euro picket fence (in a checkerboard pattern) on 3 logs, post spacing 2.5m | p.m. | 440 | |
| Installation of a fence made of Euro picket fence (in a checkerboard pattern) on 3 logs, post spacing 3m | p.m. | 420 | |
| Installation of a chain-link fence, height 1.5-2m, post spacing 2.5m | p.m. | 130 | |
| Installation of a chain-link fence, height 1.5-2m, post spacing 3m | p.m. | 110 | Includes: marking the area, drilling holes, driving in posts, backfilling, fastening the chain-link mesh. Does not include installation of gates and wickets. |
| Installation of only a welded frame 2 logs, pitch 2.5m | p.m. | 200 | Includes: marking the area, drilling holes, driving posts, backfilling, welding the frame. Does not include installation of gates and wickets. |
| Installation of only a welded frame 2 logs, step 3m | p.m. | 180 | |
| Installation of only a welded frame 3 logs, pitch 2.5m | p.m. | 220 | |
| Installation of only a welded frame 3 logs, step 3m | p.m. | 200 | |
| Add. concreting of pillars subject to installation order | pcs. | 280 | Includes sand concrete m200 + work |
| Installation of poles only | pcs. | 180 | |
| Gate installation | pcs. | 1500 | |
| Wicket installation | pcs. | 1000 | |
| Primer of pipes | p.m. | 12 | sum of pipe lengths |
| Installation of a padlock | pcs. | 500 | only the lock purchased from us |
| Installation of deadbolts | pcs. | 0 | free when purchasing deadbolts from us |
| Dismantling the fence | p.m. | negotiable | |
| Generator removal | pcs. | calculated | |
| Field manager service | pcs. | 1500 | free upon signing a contract |
| Clearing the area for installation | m2 | negotiable | |
| Concreting on piles | pcs. | 4500 | |
| Mowing grass along the fence line | p.m. | 40 | Fuel included |
| Installation of corrugated sheets on a finished frame | p.m. | 80 | Fastening with self-tapping screws |
| Installation of a Euro picket fence on a finished frame (on one side) | p.m. | 220 | Fastening with self-tapping screws |
| Installation of a Euro picket fence on a finished frame (in a checkerboard pattern) | p.m. | 270 | Fastening with self-tapping screws on both sides of the joists |
| Installation of chain-link mesh on a finished frame | p.m. | 50 | Fastening via galvanized tape |
Our company carries out work on installing a metal fence at a price per linear meter below the market price. The complex of works on installing a fence on your site or dacha is quite a difficult and painstaking task. The correct and high-quality implementation of this process is influenced by several necessary factors:
- Total weight of the entire structure;
- Characteristics of the soil at the installation site;
- Terrain;
- Surface inclination angles;
- Wind direction and windage of the structure.
If the owner has an engineering and technical education, produce everything necessary calculations won't be a big deal. But a person who is not familiar with such calculations can independently make correct installation will not work, which will lead to accelerated wear and tear of the fence.
We have the most inexpensive price for installing a metal fence
In addition to the main protective function, modern fences also have a decorative function. Masters landscape design When developing, the design, type and color of the future fence are taken into account. From us you can order the services of a specialist in the calculation and production of the required design of the fence you need. Low prices for materials and finished products, as well as prices for carrying out installation work will pleasantly surprise you.
Our company’s specialists can install a cheap fence in St. Petersburg
On our website you can arrange a call for our professional craftsmen to perform the necessary measurements and calculations, as well as turnkey construction in the Moscow region. The fencing installed by our professionals has a wide range of valuable advantages:
- Reliability;
- Durability;
- Practicality;
- Ergonomics;
- Modern design and aesthetics.
Vast experience in this field allows us to guarantee only excellent results. The materials used in the manufacture of fences and poles undergo mandatory testing to ensure they are safe for the human body and are free from radiation and other harmful factors and radiation.
You will find all information on prices in the price list for fence installation
Find out all the necessary information about prices for our products, as well as for the work carried out in the price list located on our website. The high quality of our products, low prices, friendliness and high professionalism of our employees will allow you to become our regular customer for many years.