Living in a private house forces the owner to acquire skills in related specialties. First of all, we need agronomic knowledge; we cannot leave it to our own devices. personal plot. But, in addition, every owner should be a bit of a builder, a welder and, of course, a carpenter. There is a great variety of work on a private farmstead. Carpentry involves the use large quantity special tool. Fortunately, the construction market is represented huge selection hand power tools. Many owners make do with them. But there are times when it is very difficult, and sometimes simply impossible, to make this or that product by hand. The tool must be secured. This must be done reliably - on a special table, otherwise you may not get the required quality of the product or get injured. The construction market for metalworking equipment offers a large line of tables for a circular saw or router, but their cost is such that not every owner can afford them. In this article we will offer a version of a universal carpentry table for a router and a circular saw.
DIY table for router and circular saw
Where to start making a table? Like any other design, it must start with a working sketch. It is this document that will give a clear idea of what exactly the table will be like and what is needed to make it. The drawing is developed indicating the actual dimensions, which in the process will make it possible to calculate required quantity materials.
Basic requirements for the working surface of joinery machines
The first thing that unites milling machine and a circular table - this is the need for a working surface or, in other words, a tabletop. It should be:
- flat and smooth. Otherwise, deformation of the workpieces is possible;
- tough. Deflection of the working surface during use is not allowed. This may lead to a change in the specified processing parameters, which will lead to defective parts;
- made of material that allows you to easily install stops, clamping strips, combs, shields and guard casings to maintain safety during work;
- made in accordance with the dimensions of the workpieces intended for processing. All operations must be carried out without constraint or restrictions.
Basic requirements for table design
A standard table for a circular saw has dimensions of 1.2x1.2 meters. In certain cases, the size can be changed by the user to accommodate non-standard workpieces. The height of the working surface is 0.85 meters. It may be more or less, depending on the growth of the service personnel.
As a basis for a universal table, you can use the tabletop of a machine for a circular saw. Since the saw blade is located on the left side of the table, the router can be placed on the right. It is installed taking into account the space for the workpieces being processed. It should be remembered that the master performing the milling must be at the end with right side table, and not in front of the router. This requires the installation of maximum guarding of all moving parts to prevent human contact.
Manufacturing of a circular milling table: materials
After the drawing is ready, and all design nuances are taken into account, it is necessary to select materials for making the table. As a base for machines in home workshops, structures made of wood or rolled metal are used. In the first case, the frame can be assembled from a wooden beam, fastened with corners and self-tapping screws. Bolted connections are less commonly used. The second option is welding or assembling a frame from metal pipe or angle using bolts, nuts and washers.
The tabletop is usually made of laminated chipboard, thick birch plywood or other materials that have a smooth, even surface and the ability to easily correct slight curvature.
Working plates for mounting equipment are made of metal, plexiglass or textolite.
Making a table for a router and circular saw: tools
To assemble a universal table you will need the following equipment and tools:
- Circular saw with cutting disc
- Hand router
- Laminated chipboard or plywood, 20–30 mm thick for work surface
- Bar 50×50 mm or pipe 60×40 for the frame
- Paint and varnish materials
- Wood glue
- Fasteners in the form of self-tapping screws or bolts with nuts and washers
- Electric drill
- Electric screwdriver
- Jigsaw
- Clamps
- Tape measure, corner, building level and marker
- Electric planer
- Sandpaper
Step-by-step instructions for making a combined table for a router and circular saw
After everything preparatory work finished, you can begin directly assembling the universal table. It is necessary to divide the process into separate stages:
- From the prepared materials you need to prepare the parts of the future table according to the dimensions indicated in the drawing.
- Make the frame of the future table. Coat the wooden structure with antiseptic and varnish, and the metal structure with primer and paint.
- Install the work surface and secure it to the bed. This can be done using furniture bolts. It should be remembered that all bolted connections must be countersunk and not protrude above the countertop. The working surface must be thoroughly sanded to make it smooth.
- To increase the output of the working tool, it is necessary to install metal mounting plates on the outside of the tabletop. For this purpose, a recess is made in the table surface according to the thickness of the mounting plate. They are attached to the table, and the power tool is mounted on them from below.
- A cut is made in one plate for a saw, and in the other for a cutter of maximum diameter. In addition, mounting holes are drilled.
- At a distance of 200–250 mm along the entire length of the working surface, it is necessary to cut in a T-shaped guide to install the rip fence.
- The next step will be to make a parallel stop and upper clamps in the form of combs for the router and a carriage for circular saw.
- To use the power tool safely, you need to bypass the start and stop keys and connect them to safe place on the side of the table.
A prerequisite when working with electrical equipment is compliance with safety regulations. Ignoring labor safety requirements by operating personnel can result in injury.
A circular saw is a convenient and productive tool that is present in the workshop of every real man. If you work with lumber in large volumes, then for a circular saw you will need to make.
Of course, you can make an individual order from a furniture company. But you can build such a table on your own, if you have the necessary drawings, materials and tools.
Design The table consists of only two elements:
If desired, craftsmen can add the following to the product:
- drawers;
- racks.
Important: The circular saw is mounted under the table; only its blade is located on the tabletop. The hole for the saw should be slightly larger than the blade. This way, sawdust will not clog the mechanism.
Such a piece of furniture must be quite durable and reliable. Keep in mind the greater the power of the saw, the higher the load on the table surface will be.
TO benefits a homemade table for a circular saw can also be added:
- comfort and ease of use;
- saving money;
- high labor productivity;
- the opportunity to make a product based on personal needs and the characteristics of the workshop.
Material
You can make a circulation table yourself from different materials. The most common are considered:
- or laminated chipboard;
Each individual option has its own advantages. Laminated chipboard, plywood and MDF are easy and simple to work with. In addition, these lumber are affordable. But products made from wood have higher strength and technical characteristics.
Attention: Before starting to assemble the product, all its wooden elements are treated with antiseptic compounds.
Drawing and dimensions
Before you start working, it is recommended to make a drawing of the product. On it indicate all the dimensions, materials of manufacture and other important information. You can make a high-quality drawing of any piece of furniture using special computer programs..
When making a drawing of the table, be sure to consider the size of the circular saw. Each brand of tool will have a specific size.
If you like to leave materials on the table during the work process, then The dimensions of the tabletop must be at least 120 by 120 cm.
Tools
To make a practical and comfortable table, you will need different tools and materials:
- lumber (plywood, chipboard, MDF and others);
- boards for legs;
- furniture glue;
- paint and varnish materials;
- self-tapping screws;
- drill;
- milling cutter;
- electric jigsaw;
- circular saw;
- ruler and pencil.
How to make a table for a manual circular saw?
The manufacture and assembly of a table for a circular saw is divided into certain stages:
Finishing
After manufacturing and assembling the circulation table, to simplify working moments, place it on the table it is advisable to mark. It is this that will make it easier to cut materials.
To extend the life of the product and increase its aesthetics, a hand-made table can be prime and varnish. These manipulations will also prevent the lumber from sliding on the surface and protect the product from increased moisture.
Safety in use
Keep in mind that working with a circular saw is dangerous. To avoid injury during the work process, it is necessary to constantly monitor the position of the saw table, its strength and stability.
Each time, before turning on the equipment, check how firmly it is secured in place.
Attention: Holding the cut material with your hands while the saw is running is strictly prohibited. Otherwise, your fingers may be damaged.
To prevent bouncing wood particles from getting into your eyes, work Wear safety glasses recommended.
Photo
Depending on what materials you used and how you decided on finishing, you may end up with something like this:
Useful video
We recommend watching the following video for a detailed description of the manufacturing process:
Conclusion
In conclusion, it is worth noting that making a table for a circular saw on your own is not so difficult. And its presence will significantly simplify and even expand the functionality of using the circular saw.
Code 117 "Economy version"!
Ready-made kit - "Economy version"!
Equipment:
Table top made of laminated plywood 27 mm. with ALU-TRACK 2 profile for additional equipment! Under the parallel stop, through grooves are made in the tabletop to prevent clogging with chips.
Aluminum rip fence with sliding jaws, fastening mechanism and dust extraction.
Plate for any router model!
Please indicate the router model in the notes!
In stock
Option 1 "Economy" Option 2 "Economy with NEW profile"
16500.00 RUR
Add
Code 113 - "Top version"
Ready kit Top version!
The photo shows the FULL version!
The kit includes:
with engraved rulers (as a gift)
- parallel aluminum stop (with dust extraction pipe and sliding cheeks)
Attention!
“Choosing the EQUIPMENT” +plate for router (any model) +plate+button +hard metal base Full version=set+base+plate+button
RUB 24500.00
Add
Code 115 "Circular table"
New! Circular table!
The photo shows the FULL version!
Sawing, on a platform with a wear-resistant stainless steel pad. Guaranteed sawing on a rip fence of 450 mm, this is usually sufficient for the manufacture of furniture cabinets and cabinets with a depth of 450 mm.
The kit includes:
-tabletop 650x990x27 mm with ALU-TRACK 2 profile
- stainless steel plate 3 mm thick,
-parallel aluminum stop on the moving shaft
- saw insert
-universal fasteners for attaching circular saws without drilling the sole!!!
In the photo, in addition to the specified set, there may be a base, plates, clamps, etc. They are not included and must be purchased separately!
Production time from 12 working days!
Product unavailable.
“SELECTION OF EQUIPMENT” -set of upper roller clamps -full set of roller clamps -steel underframe with wheel brake supports set+magnetic start button Full version=set+upper roller clamps+buttons+underframe
RUB 25,000.00
Add
Code 114 - "Super Top version"
Ready set Super Top!
The photo shows the FULL version!
It is possible to complete the set without a base!
The kit includes:
- tabletop made of laminated plywood, size 800x600x27 mm. with ALU-TRACK 2 profile
- stainless steel plate 3 mm thick,
- engraving on the ruler overlay (as a gift!)
To order, production time from 12 days!
In the section: "Video/photo/reviews" there are several mini video reviews!
*Some photos show plates, clamps, etc. They can be purchased separately in the ACCESSORIES section or by selecting the required package below!
*When ordering, please indicate your router model in the NOTE!
Attention!
"Product specifications and configurations are subject to change by the manufacturer without notice."
“Choosing the EQUIPMENT” +plate (any model to choose from) +plate+button +steel underframe Full version=set+underframe+plate+button
RUB 26500.00
Add
Code 116 "Circular table with router capabilities"
New! Circular table with router capabilities!
The photo shows the FULL version!
Sawing, milling and all on one platform with a wear-resistant stainless steel plate. Guaranteed sawing on a rip fence of 450 mm, this is usually sufficient for the manufacture of furniture cabinets and cabinets with a depth of 450 mm.
Video available in Photo/Video section!
The kit includes:
-tabletop 650x990x27 mm with ALU-TRACK 2 profile
- stainless steel plate 3 mm thick (with a window for a circular saw and any model of router)
- engraving on the ruler overlay (as a gift!)
-parallel aluminum stop on a moving shaft (with dust extraction pipe and sliding cheeks)
- saw insert
- fasteners for fastening circulars
In some cases, you make the mounting holes for your saw yourself!
Attention!
"Product specifications and configurations are subject to change by the manufacturer without notice."
| Product unavailable. |
“SELECTION OF EQUIPMENT” - a set of upper roller clamps - a complete set of roller clamps - a steel underframe with wheel brake supports set + two magnetic start buttons Full version = set + roller clamps + buttons + underframe
RUB 29,000.00
For greater convenience, the hand-held circular saw can be mounted on a table. This design will help you process and saw wooden parts quickly and without problems.
Working with a circular saw mounted on a special table greatly simplifies the cutting process and is safe when using special tools.
In this article we will tell you how to make a hand-held circular saw with your own hands.
Circular saw table design
The table base for a circular saw can be wooden or metal.
The tabletop is made of metal or sheet wood materials. A hole is made in it for a circular saw blade.
Supports ride along guides in the tabletop, which move timber and any other sawing material.
First of all, the table should be comfortable, stable (not wobble!), the surface of the tabletop should be flat. These factors will help a person avoid injury during work.
The hole in the base is cut for a specific brand of saw
Before you start cutting material and assembling circular table, you need to calculate its dimensions and make a drawing.
The hole in the base must correspond to the dimensions of the circular saw platform. For each brand of saw this will be a specific size.
The slab installed on the tabletop should not overhang the table to one side - the base must be resistant to external mechanical loads.
The dimensions of the tabletop must correspond to the flow.
For some, a folding table, a small table with a removable circular saw, is enough. People who have a spacious workshop need a full-fledged table for a circular saw or even a circular saw.
Please note: If you plan to leave materials on the table while working, then the area of the tabletop should be at least a square meter. Optimal size for such a table 120 x 120 cm.
Materials from which you can make a table for cutting wood:
- solid wood;
- Chipboard, chipboard, MDF, plywood;
- metal (steel or aluminum).
Plastic is not suitable as a material for making a saw table.
Prior to final assembly, all wooden parts of the table should be protected from moisture and rot.
To make a saw table with your own hands, we will need the following materials:
- Laminated chipboard or plywood 21 mm thick;
- timber for the table frame (can be used edged board 50 x 150 mm, 3 meters long – 5 pcs.);
- wooden dowels 10 mm – 12 pcs.;
- wood glue;
- metal fastenings for drawers and legs – 4 pcs.;
- metal corners– 10 pcs.;
- self-tapping screws
Tools required for work:
- pencil, marker, tape measure, meter;
- jigsaw;
- manual ;
- grinding machine;
- medium and fine grit sandpaper;
- plane;
- drill;
- screwdriver
Step 1. First, use a plane to trim all sides of the beam. We assemble the table frame from the timber: in each side of the tabletop we drill two 5 mm holes for dowels for each drawer and one hole for each table leg.
Step 2. You need to make two holes (5 mm) in the drawers, and one hole (5 mm) in the legs.
Step 3. We install the dowels into the tabletop, having previously lubricated them with wood glue. Tsars and legs are installed on top.
If you have clamps with ties, you can secure the table with them. After the glue has completely dried, the drawers are fastened to the legs and to each other with special metal fasteners for tables and tightened with self-tapping screws.
Please note: the table will be stronger and more stable if you use metal corners for additional fastening of the tabletop: two on the short side and three on the long side.
Step 4. Now you need to secure the circular saw to the inside of the tabletop. There can be two options: fasten the saw platform with M4 bolts or fasten the platform using bars with self-tapping screws. The first option is faster and more reliable. The second option does not require drilling holes in the metal pad for bolts.
Step 5. You can secure the saw with bolts or bars with self-tapping screws. We will fasten with blocks, so we make a cut in small blocks the width of the saw platform. Using blocks with self-tapping screws on both sides, we fasten the circular saw to the tabletop.
Step 6. When the saw is installed, take another larger block and screw it to the tabletop with self-tapping screws (directly to the previously marked points along which the saw platform was aligned exactly). This block is necessary so that later, when removing the saw from the table, you can quickly return it to its place without resorting to markings.
Step 7 Place the circular saw blade in place and saw through the tabletop to create a longitudinal hole. Turn the tabletop over.
Step 8 We make a parallel stop. To do this, we saw off two strips of plywood with a length equal to the width of the table and a width of about 8–10 cm. We round the corners using a protractor and a pencil.
Step 9 We sand both strips and fasten them together using self-tapping screws at an angle. We screw a metal corner inside.
Step 10 At permanent job with a table for a circular saw and the need to secure the stop on the tabletop, a guide is fixed perpendicular to the disk. The roller or the second part of the guide is attached to the bottom of the fence so that the fence can move up / away from the circular saw blade.
Workplace safety
In order to avoid injury during work, it is necessary to carefully monitor the position of the saw table, its stability, and strength.
Before each use of the circular saw, check that it is securely in place.
Holding the cut material with your hands is strictly prohibited! This can lead to injury to your fingers or the wood to bounce into your face if it hits knots or uneven surfaces.
Also, to avoid eye injury, be sure to wear safety glasses while working.
Don't neglect these simple rules, take care of your own health.
For more information on how to make a table for a hand-held circular saw with your own hands, see the following video:
Which is popularly called a circular saw, is a productive and convenient tool. It can be used to perform a huge number of tasks. Perhaps you own it or are just planning to purchase it. However, when cutting large batches of material, working with such a device is quite difficult. You can make this process easier with the help of a table, which you can make yourself. This idea is easy to implement, and you need to prepare boards and plywood before starting work.
The hand saw is located below the working surface, but its working disk is in the slot. After turning on the equipment, the disk rotates, and when lumber is supplied, the cutting process begins. The maximum thickness of the workpieces processed will depend on the power of the saw and the size of the blade. When choosing a tool, you should take into account the thickness of the tabletop on which it will be mounted.
Preparation of materials
If you decide to make a table for a circular saw with your own hands, then first you need to take care of the availability of some materials and tools, among them the following should be highlighted:
- board;
- drill;
- wood varnish;
- pencil;
- ruler;
- plywood;
- bar;
- glue.
If you decide to start making a table yourself, you must have wood cutting skills. As for plywood, its thickness should be 20 mm or more. When looking for a board, you should pay attention to the one whose dimensions are 50 x 100 mm. But the block should have a square cross-section with a side of 50 mm. You will need it for the legs.
You should also stock up on an electric jigsaw, a screwdriver and manual router. Self-tapping screws will serve as fasteners. After manufacturing, the structure will need to be varnished to extend its service life. Before you make a table for a circular saw with your own hands, you must decide on its dimensions, which will depend on the length of the workpieces being processed.
The cut will be smoother and more accurate if the workpiece rests on the entire plane of the table. However, the parameters of the working surface should not be too large, since the design will clutter the space. You need to come to an average value, but the height of the table is usually selected individually, it depends on the height of the operator.
By drawing a table for a circular saw, you can avoid many mistakes. If you still cannot decide on the size of the working surface, then you can take the following parameters as a basis: 50x50x25 cm. They are suitable for a small workshop. You may need a switch and socket, as well as a piece of electric cable. However, this is true if you plan to modernize electrical equipment.
Manufacturing technology
Using 20 mm plywood, you must make a blank for the tabletop, being guided by the selected dimensions. The canvas is marked using a marker and a ruler, and then cut with an electric jigsaw. The edges must be processed with a router. The material is sanded.
On the underside of the tabletop you need to mark for the saw. To do this, the blade is turned over, and the saw should be installed without a disk at the intended location. This way you can mark the parameters of the sole. Using a router, a recess is made in the tabletop in the range of 8 to 10 mm, and it is necessary to follow the seat that was marked in advance.
Work methodology
When making a table for a circular saw with your own hands, at the next stage you can try on the saw and adjust its position if necessary. Then the attachment points are marked, as is the slot for the toothed disk. If the material will be cut at different angles, then this point must be taken into account when marking the slot. In this case, the hole will have a trapezoidal cross-section, and the figure should be positioned with the top down.
At the bottom of the working surface, using a ruler and pencil, you need to mark the stiffeners. The table legs will be attached to them later. The ribs should be made from a board whose dimensions are 50 x 100 mm. These elements are located around the perimeter, but they must be removed 10 cm from the edges of the table.
The board should be applied to the surface and traced on both sides, then the center line on which the screws will be located is marked using a ruler. They must be removed 5 cm from each edge of the ribs, positioned in increments of 20 cm along the entire length. When making a table for a circular saw with your own hands, you need to drill a hole through the markings.
For longitudinal stiffeners, markings should be made by sawing the boards. They are fixed to the tabletop using wood glue, and then tightened with clamps. The side stiffeners are marked in place; they need to be sawn and glued. The structure should be additionally tightened with self-tapping screws without removing the clamps. Holes are prepared for them on the outside so that the caps are completely recessed. The stiffeners are tightened together using self-tapping screws installed on each side. The clamp can be removed, which will allow you to understand how the tabletop will look.
Making legs
When making a table for a hand-held circular saw, at the next stage you can start making the legs; for this, boards with dimensions equal to 50 x 100 mm are used. The legs need to be made taking into account that it is convenient to work. On average, this parameter reaches 110 cm. The board must be cut along the longitudinal axis, ensuring a small angle on one side.
The workpiece is tried on the work surface so that during installation it stands slightly apart. The legs are fixed on the outside of the elements to provide rigidity; bolts should be used for this. In order to achieve stability, you can use ties; they are made from square timber with a side of 50 mm.
Saw installation
Table-mounted circular saws are very easy to use. At the next stage, you can start fixing the tool. To do this, the sole is fixed with bolts, and the working disk should look out into the slot. Markings are applied to the table, this will make cutting easier. To protect against moisture and facilitate the sliding of workpieces, the table should be coated with varnish, applied in several layers.
Turning the saw on and off
When someone is ready, you can decide how the equipment will be turned on and off. If you have appropriate knowledge in the field of electrical engineering, then the power key can be bypassed. The control button is placed on the outer surface of the rib.
If you have made a table for a hand-held circular saw with your own hands, but automating the operation of electrical equipment is too difficult a task for you, then the key can be pulled together with a wire, and the device itself can be turned on and off using a power cord. The table design described above is quite simple. Any home craftsman can handle the manufacturing task. If you want to expand the functionality, you can take care of safety by making the design more complex.
Conclusion
A table-mounted handheld circular saw can be a great tool for anyone who enjoys working with wood. If you have to cut lumber quite often, then it is worth spending one day making a structure that will last a long time and will increase labor productivity.