The high cost of traditional energy sources makes everything more people think about creating alternative source energy. As a rule, the choice is given to so-called fuel-free generators, because their operation does not require either an internal combustion engine or another device in which valuable raw materials will be burned.
During operation of a fuelless generator, electricity in the system is recirculated through the coil in the opposite direction, thereby ensuring the presence of voltage in the electrical network.
Currently, there are two ways to create a fuel-free generator, namely wet, also called oil and dry.
When creating a generator using the wet method, you will need a battery. While a generator operating on the principle of the dry method does without a battery.
Wet method
In order to assemble a wet fuel-free generator, the following components will be required: A battery is necessary to accumulate energy in it and store it.
Transformer - used to create direct current.
An amplifier is needed to increase the current supply. This is necessary due to the fact that the battery is not capable of producing the required power; as a rule, its maximum power is 12 or 24 V.
The charger ensures uninterrupted operation of the generator.
Generator assembly diagram
Transformer AC connected to a permanent network, to a battery, and then to a power amplifier. Then you need to add it to the diagram charger. The assembly stage is completed by an expansion sensor, which is connected back to the battery.
Dry method
The operating principle of a dry fuel-free generator is based on the presence of capacitors. This type of energy production is currently the most advanced and efficient. Since it can work continuously and without recharging for 3 years.
Dry generator circuit
The generator has simple diagram, which consists of a pair of coils with capacitors, transformers and a magnet. The peculiarity of this generator is that the coils must be tuned to resonance with each other. And the model itself should be oriented strictly from north to south.
The creation of a dry fuel-free generator begins with the creation of coils. To do this, you should take a copper wire with a cross-section of 1.5 mm, it should be wound on wooden sticks, which are fixed at a distance of 500 mm from one another. It should be remembered that the number of turns on both sticks should be equal (for example, 12 turns).
The second layer of turns should be made with wire with a large cross-section (for example, 2.5 mm). This wire, like the previous one, is laid on two coils, but with six turns each. Next, it is recommended to take another wire, but of a different color and cross-section of 2.5 mm, and make another 6 turns. It is very important that the number of skeins and the winding direction be the same.
Next, the finished coils are fixed on a moving mechanism. It should be remembered that when moving, the coils should move without effort, distortion or tension. Next, you can begin assembling the entire mechanism. A magnetic resonator (magnet) is fixed in front of the coils, then you should take capacitors of at least 500 μF and place one capacitor inside the coils and two capacitors on the outside. The last thing we connect is the transformer. All parts are connected to each other using soldering.
How to check functionality?
There are two ways to check the functionality of the generator: by connecting a light bulb to it and using a multimeter. During the check, it is necessary to take into account that contact with the light bulb must be constant and good. If there is sufficient charge in the battery, the light bulb will burn with the same power; if the lamp blinks or goes out, you need to check the circuit for breaks.
To check the operation of the generator with a multimeter, switch the device to the “Ringing” state. If the device does not have this function, then set the resistance to 1 ohm. If everything is assembled correctly and the generator is working, then in the “ringing” mode, when two contacts are closed, the multimeter will ring.
Ecology of consumption. Science and technology: Fuel-free generators are gaining more and more popularity, thanks to the only, but very important advantage - the absence of fuel
Electricity generators are becoming increasingly popular every year not only among private users, but also in industry. This is directly related not only to saving money, but also to reducing the production of exhaustible minerals.
However, the most common fuel for them is still gasoline and diesel fuel. Their breakdown products are toxic and cause pollution environment. Another thing is fuel-free generators, which have many advantages over their fuel counterparts. We'll find out what exactly they are next.
Saving mineral resources occupies a key place in the economy for many countries. This is successfully achieved through the use of fuel-free generators, whose operating principles are based on the elementary physical phenomena of magnetic induction current. Of the most successful and effective today, the following types of BG are used:
- Dudyshev rotor - uses a magnetic current, which is converted into electrical impulse.
- Minato magnetic motor has an increased efficiency of 100%, which is achieved through power amplifiers.
- Johnson motor - has a compensator, but is not effective in industry due to low power.
- The Adams generator is the most popular and efficient magnetic motor, which has a simple design, but high level Efficiency
- Dudyshev solenoidal motor - has an external magnetic rotor, which is effective only when using low powers (with a “wet” design).
Let's take a closer look at Adams generators, which are most often found on the market of alternative sources of electricity.
Fuel-free generators operate on the principle of generating free energy, converting it into induction current. Such great physicists as Adams (after whom the device is named) and Bedini devoted their research to this physical phenomenon. These units are widely used as an autonomous energy supply for private homes, as well as:
- in shipping;
- in the automotive industry;
- farm and forest land;
- in aircraft manufacturing and astronautics.
They are effective where there is no possibility of supplying fuel (diesel, gasoline, coke, gas, etc.), and natural energy (wind, solar energy, ebbs and flows) is not so powerful as to provide electricity at full capacity.
It is necessary to separate the concepts of “perpetual motion machine” and “energy generator of Adams memory”. They are similar in work, but the latter require constant maintenance and periodic repairs.
Their operation does not depend on environmental factors, therefore the Vega fuel-free generator has the following features and advantages:
- Can be used away from any sources of electricity, as well as in open and closed areas, under the influence of precipitation.
- They use kinetic energy as fuel.
- They have no restrictions in operation and energy production.
- Does not have any negative effects on human health or the environment.
- The unit is quite compact and can be assembled independently if desired.
- Has a service life of at least 20 years.
The most important advantage of Vega generators is no need to impart constant movement to the generator shaft. This is done automatically by converting kinetic and electromagnetic energy into impulse.
The motor operates solely on the force of magnetic repulsion from the ends of the electromagnets. To do this, an induction field is created, which allows the production of an electrical impulse from magnetic oscillations.
The most primitive design of Adams generators contains the following elements:
- Generator - is a hermetically sealed cylindrical container, inside of which an electromagnetic field is created due to the influence of external coils.
- Voltage converter - generates electricity by converting magnetic pulses into alternating current.
- Rechargeable batteries – accumulate the received charge, allowing you to use it at any convenient time.
The main structural element is a gearless direct rotation generator, which is multi-pole in structure. Along its outer edge there are magnets, the number of which is selected individually, depending on the desired power. In the process of creating an electric field, the generator rotates around its axis, generating Efficiency no less than 91%. The generators are well connected to each other, which makes it possible to obtain autonomous power grids at absolutely no cost. This is beneficial in the case when the power of one generator does not exceed 5 kW, and at least 10 kW is required to fully provide electricity.
The operation of the generator under load is demonstrated in the video
Let's look at the example of creating an Adams-type generator, producing a small amount of power.
So, for work you will need:
- Magnets - their size will affect the induction field and the energy generated, so small pieces, preferably of the same size, are suitable for testing. For a full-fledged generator, 15 pieces will be enough.
The magnets must be installed towards each other with one pole - plus. Otherwise, the induction field will not be created.
- Copper wires.
- Two coils - you can either take it from ready-made motors or make it yourself by gradually winding two copper wires, starting from the bottom and moving up.
- Sheets of steel from which the body (frame) will be made.
- Nails, bolts and washers for securing small parts.
Let's get started. The first step is to attach the linear magnet to the base of the coil by drilling a hole and securing the latter with bolts. We wind wires (1.25 mm each) with insulation onto the coils. We install the coils on the metal frame so that there are gaps at the ends necessary for torsion of the main element. Actually, the unit is ready for use. Whether it was assembled correctly or not is very easy to check. To do this, you need to twist the magnets by hand, applying maximum force. If voltage appears at the ends of the winding (we check with a special device), then the unit is completely ready for operation.
Naturally, this circuit is primitive, but it reflects the essence of the idea - to create a generator that would operate without fuel, using the power of magnetic current. Such a generator is unlikely to be suitable for a home, but it will be quite possible to charge a mobile phone.
In the market of magnetic generator manufacturers, three leaders stand out significantly:
- "Vega";
- "Verano-Co";
- "U-Polemag";
- "Energystem".
"Vega"
The manufacturer produces generators that operate on the principle of magnetic induction, the idea of which was brought into reality by the scientist physicist Adams. Price certain models completely depends on the output power and dimensions of the unit. The price starts from 45,000 rubles. Among the obvious advantages are the following indicators:
- high level of environmental friendliness;
- silent operation, allowing the generator to be installed in a residential area;
- compactness;
- wide range of models from 1.5 to 10 kW.
Duration of work – at least 20 years. Operation and repair depends on the model. The most frequently replaced parts are batteries, which last for 3-5 years of use.
The operation of the generator is shown in the video
"Verano-Co"
Ukrainian manufacturer that uses high-quality components for its models. It is based on the production of generators of alternative energy sources, intended not only for domestic needs, but also for generating energy on an industrial scale. The operating principle is similar to all magnetic generators. The price range for the model range varies from 50,000 to 180,000 rubles.
"U-Polemag"
Chinese manufacturer, leader in the number and variety of models. Efficiency – 93%, with less than 1% energy loss. Compact dimensions and light weight are ideal for home use. The low level of noise and vibration allows you to keep it in the house without fear for your health. The package includes modern systems cooling, allowing to increase the service life up to 15 years. It is distinguished by its affordable prices, which on average range from 31,000 to 85,000 rubles.
"Energistem"
Engaged in the production of fuel-free vertical generators that operate on magnetic current. Many users of such units are dissatisfied, expressing somewhat contradictory opinions regarding the quality and power of the generators produced. The slightly inflated cost of 50,000 rubles and above makes this company last in the ranking of BTG manufacturers.
Any new generators (and magnetic ones even more so) cost a lot of money, so before buying one the question arises: how to buy cheaper, but high-quality model? Recently, it has been fashionable to buy goods from China, which are famous for their cheapness and relatively tolerable quality. Generators or components for them can also be ordered abroad, but the risks are high:
As you can see, the savings are completely false. Another option is to purchase from the manufacturer. But even here there are some problems. Without knowing all the intricacies of the design and operating features of the unit, an experienced salesperson and marketer can “sell in” a generator that will not meet the requirements. It’s not for nothing that they say that if you’re armed, you’re protected! Therefore, before buying an induction magnetic generator, you need to:
The video shows a Vega Adams generator
This question is quite difficult to answer, because as many people there are as many opinions. Remember the main thing - main task of an induction vertical fuel-free generator is to provide electricity with the power that is required. If the power is not enough, the generator can act as an auxiliary source of electricity. When choosing a model, the savings will not be justified, since cheap units are created from cheap materials that will not serve faithfully for ten years, as they should.
A generator, just like a car, is something everyone chooses for themselves, taking into account their personal preferences and requirements. Model, power, dimensions and others technical specifications depend entirely on where, how, when and for how long the fuelless generator will be used. published
Well, that’s the end of the merry first of April, where evil Martian reconnaissance again prevented the whole world from making the whole world happy overnight! :-) So jokes and pranks aside, because today we will talk about really serious things. Yesterday, oddly enough, also on the first of April, one of the regulars of the community of free energy seekers under the nickname Armored Train and named Victor, presented to the public his sample of a fuel-free generator, which for simplicity was immediately “christened” BTG Armored Train. Victor not only disassembled the entire generator before wiring, but also arranged two live broadcasts afterwards, to prove to all doubters that there are no hidden power sources or other bookmarks in his BTG.
But many skeptics were not convinced at all, since arguments do not count, and assumptions are more expensive. As a result, Victor was pretty exhausted by “stupid” questions and suspicions and is unlikely to want to prove anything to anyone in the future.
On the other hand, these were questions that, no matter how much you wanted, you couldn’t take on faith, because faith in physics is the lot of theoretical and fundamental physicists. In applied physics, which essentially includes all alternative and free energy devices, everything is simpler. There is and should not be faith here; everything here should be clear, transparent and repeatable. That is, you can touch everything and figure it out yourself. This is what we did all evening yesterday. We took Victor’s generator apart, argued, doubted, but we didn’t find anything seditious in it, which means with a very high degree of probability, this generator is not a fake and can be taken for repetition. Why don’t we say specifically - Yes, the BTG of the Armored Train works?... Yes, if only because it is not enough to have a working model, you need to have stable repeatability, and this does not exist yet due to the fact that very little time has passed and no one has yet managed to repeat this device. So join us!
Let's finish the theoretical part and move on to practice!
Video of the fuel-free generator of the Armored Train:
Live broadcast recording, part 1
Live broadcast part 2
Fundamental electrical diagram BTG Armored Trains
Layout printed circuit board fuel-free generator of the Armored Train.
PCB layout of BTG Armored Train
Let us remind you that those who subscribe to our channel on YouTube or attend our voice conference learned about everything yesterday and were real witnesses of what was happening live. Join us too!
You can make a generator that is powered by daylight. This is an excellent analogue of a solar panel, but the main advantage of such a generator is a minimum of materials, low cost and ease of assembly. Of course, such a generator will produce much less energy than solar panel, but you can do a lot of them and thus get a good influx of free energy.
Nikola Tesla believed that the whole world is energy, so to receive and use it, you just need to assemble a device that could capture this free energy. He had many different projects for “fuel-free” generators. One of them, which today everyone can do with their own hands, will be discussed below.
The principle of operation of the device is that it uses the energy of the earth as a source of negative electrons, and the energy of the sun (or any other light source) as a source of positive electrons. As a result, a potential difference appears, which forms an electric current.
In total, the system has two electrodes, one is grounded, and the other is placed on the surface and captures energy sources (light sources). A large capacitor acts as a storage element. However, these days the capacitor can be replaced with a lithium-ion battery, connecting it through a diode so that the opposite effect does not occur.
Materials and tools for making a generator:
- foil;
- a sheet of cardboard or plywood;
- wires;
- high-capacity capacitor with high operating voltage (160-400 V);
- resistor (not required).
Manufacturing process:
Step one. Making grounding
First you need to make a good grounding. If the homemade product will be used in a country house or village, then you can drive a metal pin deeper into the ground, this will be grounding. You can also connect to existing metal structures that go into the ground.
If you use such a generator in an apartment, then here you can use water and water supplies as grounding. gas pipes. All modern sockets also have a ground connection; you can also connect to this contact.
Step two. Making a positive electron receiver
Now we need to make a receiver that could capture those free, positively charged particles that are produced along with the light source. Such a source can be not only the sun, but also already working lamps, various lamps, and the like. According to the author, the generator produces energy even when daylight in cloudy weather.
The receiver consists of a piece of foil, which is mounted on a sheet of plywood or cardboard. When light particles “bombard” an aluminum sheet, currents are formed in it. The larger the foil area, the more energy the generator will produce. To increase the power of the generator, several such receivers can be built and then all of them connected in parallel.
Step three. Connecting the circuit
At the next stage, you need to connect both contacts to each other, this is done through a capacitor. If you take an electrolytic capacitor, it is polar and has a designation on the body. The ground must be connected to the negative contact, and the wire going to the foil to the positive contact. Immediately after this, the capacitor will begin to charge and electricity can then be removed from it. If the generator turns out to be too powerful, the capacitor may explode from an excess of energy; therefore, a limiting resistor is included in the circuit. The more charged a capacitor is, the more it will resist further charging.
As for a conventional ceramic capacitor, their polarity does not matter.
Among other things, you can try to connect such a system not through a capacitor, but through a lithium battery, then it will be possible to accumulate much more energy.
That's all, the generator is ready. You can take a multimeter and check what voltage is already in the capacitor. If it is high enough, you can try connecting a small LED. Such a generator can be used for various projects, for example, for autonomous LED night lighting lamps.
In principle, instead of foil, you can use other materials, for example, copper or aluminum sheets. If someone in a private house has a roof made of aluminum (and there are many of them), then you can try to connect to it and see how much energy will be generated. It would also be a good idea to check whether such a generator can generate energy if the roof is metal. Unfortunately, no figures were presented that would show the current strength in relation to the area of the receiving contact.
Post navigation
New fuel-free generator permanent magnets in the rotor and bifilar coils in the stator. The generator is made and shown in two versions, with a power of 1 kW and a power of 10 kW. The author of the invention is Andrey Vladimirovich Slobodyan. The video demonstrates not only the launch and...
Great video that talks about the current state of things in the cold fusion market. The video provides specific examples, indicating absolutely real names of companies that carried out transactions for the purchase and sale of the Russian cold fusion generator. Speech in...
The topic of obtaining electricity from the ground has already been repeatedly raised on our resource, both in the form of various theories and in the form of completely finished and working devices. Many experiments on this topic were carried out by the project participants, and the results of many experiments were very...
We are pleased to present you a new video that demonstrates in full autonomous operation fuel-free energy generator. The author of the video demonstrates work in a forest where there are no residential buildings, no people, no electricity or power grids. All that is required for the generator to operate is good grounding. In the given...
Well, that’s the end of the merry first of April, where evil Martian reconnaissance again prevented the whole world from making the whole world happy overnight! :-) So jokes and pranks aside, because today we will talk about really serious things. Yesterday, if not...
From letters from project participants... We invite you to familiarize yourself with John Bedini’s generator, which, according to its author, operates in self-powering mode by switching batteries using a timer.. The main essence of this design is that after a certain period of time, the charging battery becomes...
The purpose of this work is to elucidate the energy characteristics of over-unity synchronous generators with permanent magnets, and, in particular, the influence of the load current creating a demagnetizing field (armature reaction) on the load characteristics of such generators. Two disk synchronous generators of different power and design were tested. First …
This article will describe in detail the experiments carried out on obtaining alternative and free energy at home, describe how to independently build a fuel-free generator of free and alternative energy, and also show new, absolutely amazing properties electric current. Electric though!? ...